True Dual Photos
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Location: Chesapeake VA
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
True Dual Photos
Hi everyone, im interested in getting some pictures of some peoples' true dual setups.
Put in a picture or two with a description of your setup. (pipe diameter, mufflers, cats, headers, etc.)
Also some ground clearance pictures would be nice
Thanks
Put in a picture or two with a description of your setup. (pipe diameter, mufflers, cats, headers, etc.)
Also some ground clearance pictures would be nice
Thanks
#3
TECH Enthusiast
iTrader: (7)
Join Date: Aug 2002
Location: Tucson, AZ
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
There are a ton of pics and videos of true dual setups at ls1sounds.com with details and descriptions.
Here are some pics of mine. True duals are taken all the way out the back going under the axle. I used an x-pipe and the pipes are 2.5" all the way back.
These first few pics are of my setup when I had the duals dumped
These are after I took the duals all the way out the back under the axle.
And here is a clearance shot
Hope this helps,
Brian
Here are some pics of mine. True duals are taken all the way out the back going under the axle. I used an x-pipe and the pipes are 2.5" all the way back.
These first few pics are of my setup when I had the duals dumped
These are after I took the duals all the way out the back under the axle.
And here is a clearance shot
Hope this helps,
Brian
Last edited by DVST8OR; 11-28-2005 at 12:04 AM.
Trending Topics
#8
TECH Enthusiast
iTrader: (7)
Join Date: Aug 2002
Location: Tucson, AZ
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fastlt1
Never thought about under the axle. Do you just unbolt for the track?
You could. I just put the flanges there for when I need to drop the rear end. That way I don't have to take the entire exhaust system off.
And to everyone else - thanks for the compliments.
#12
TECH Regular
iTrader: (4)
Join Date: Jul 2005
Location: Columbus, Ohio
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BlackHawk T/A
How much is your car lowered Brian?
Thinking about doing the same thing.
Thinking about doing the same thing.
#15
TECH Enthusiast
iTrader: (7)
Join Date: Aug 2002
Location: Tucson, AZ
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fastlt1
Have you ran into any problems going under the axles?
#16
TECH Enthusiast
iTrader: (7)
Join Date: Aug 2002
Location: Tucson, AZ
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BlackHawk T/A
How much is your car lowered Brian?
Thinking about doing the same thing.
Thinking about doing the same thing.
#17
TECH Fanatic
iTrader: (7)
I had mine run under the axle as well and haven't had a problem with it. I like the sound, but sometimes I miss the dumped sound. I am going to have flanges welded on like DVST8OR so that I can run them dumped or out the back. Plus i got some better looking tips. Hopefully I'll have mine done around Christmas.
#20