TB Bump Stop Mod ??
#1
TB Bump Stop Mod ??
I checked my WOT voltage today because I was wanting to perform the Bump Stop Mod, and i found that my WOT voltage was only 4.44VDC. That seemed awfully low to me. I know that 4.70VDC is where I needed to stop so that i did not set an SES light. so i ground it down to 4.69VDC. What I was wondering was will i notice any difference when I get the car out again next spring? i looked at the throttle blade before and after and I could not notice any difference. Does anyone have any experience with this mod? Thanks.
#2
TECH Apprentice
iTrader: (7)
You might want to check out: https://ls1tech.com/forums/generation-iii-external-engine/420817-bumpstop-mod-my-first-try-writing-install.html
It's a current discussion...
It's a current discussion...
#3
TECH Addict
Join Date: Nov 2001
Location: Live Oak, FL - in the woods where the creatures lurk.
Posts: 2,003
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by nytmare1
You might want to check out: https://ls1tech.com/forums/showthread.php?t=420817
It's a current discussion...
It's a current discussion...