Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

which way should i go???

Thread Tools
 
Search this Thread
 
Old Feb 25, 2003 | 03:47 PM
  #1  
franny40's Avatar
Thread Starter
12 Second Club
 
Joined: Feb 2003
Posts: 371
Likes: 0
From: Imperial, CA
Default which way should i go???

I have a 2001 z-28 A-4. The only mods i have gotten around to is the free ran air, K&N filter and a magnaflow muffler. What i want to know is which package should i choose: fast toys ram air and direct low lid (optional granatelli MAF), or the K&N FIPK. I was leaning towards the fast toys package at first, but then i heard some rather good testimonials for the FIPK. Any and all opinions and suggestions are welcome. Thank you.
Reply
Old Feb 25, 2003 | 07:16 PM
  #2  
franny40's Avatar
Thread Starter
12 Second Club
 
Joined: Feb 2003
Posts: 371
Likes: 0
From: Imperial, CA
Default Re: which way should i go???

hello!!anyone out there <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Reply
Old Feb 25, 2003 | 07:32 PM
  #3  
NightHawk's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Jan 2003
Posts: 1,476
Likes: 0
From: Sarasota, FL
Default Re: which way should i go???

Bro, you're going to have to wait more than 4 hours before you get impatient. As WILWAXU is known to say "This is not a Facts on demand site" its an information exhange.
Reply
Old Feb 25, 2003 | 07:36 PM
  #4  
franny40's Avatar
Thread Starter
12 Second Club
 
Joined: Feb 2003
Posts: 371
Likes: 0
From: Imperial, CA
Default Re: which way should i go???

i am not impatient, i was trying to be funny, did you miss the smiley at the end of my post.NOTE: This is not an attack.
Reply
Old Feb 25, 2003 | 07:36 PM
  #5  
NightHawk's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Jan 2003
Posts: 1,476
Likes: 0
From: Sarasota, FL
Default Re: which way should i go???

P.S. From what I hear, if you have the money to spend go with the FIPK, but both systems work very well.
Reply
Old Feb 25, 2003 | 07:39 PM
  #6  
NightHawk's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Jan 2003
Posts: 1,476
Likes: 0
From: Sarasota, FL
Default Re: which way should i go???

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by franny40:
<strong> i am not impatient, i was trying to be funny, did you miss the smiley at the end of my post.NOTE: This is not an attack. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif"><img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
cool--I'm big on sarcasm, but its hard to convey over the computer sometimes <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Reply
Old Feb 25, 2003 | 08:22 PM
  #7  
dug's Avatar
dug
Banned
iTrader: (10)
 
Joined: Aug 2002
Posts: 3,721
Likes: 0
From: Phoenix
Default Re: which way should i go???

All the aftermaket lids are pretty much the same. The granatelli maf has had mixed reviews. Poking out the screen on the stock maf will help flow. You can buy the maf ends or port them yourself for more hp. Be warned that messin with the maf will change the line pressure in the trans which could cause problems. Hope this helps. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Reply
Old Feb 25, 2003 | 10:12 PM
  #8  
franny40's Avatar
Thread Starter
12 Second Club
 
Joined: Feb 2003
Posts: 371
Likes: 0
From: Imperial, CA
Default Re: which way should i go???

Thanks for all the advice fellas, keep it coming. <img border="0" alt="[driving]" title="" src="graemlins/gr_driving3.gif" />
Reply




All times are GMT -5. The time now is 03:43 AM.