LS6 intake or not?!?
LS6 intake or not?!? Here is the situation. I bought this car off tech last March. The gentleman said it had an LS6 intake and camshaft (with springs). I do not think this is an LS6 intake since it does not look like others I have seen. The number above the firing order on the driver side is stamped: 12561184. Below are two pictures for reference. I !EGR and !AIR last winter.
Any insight is appreciated
Andy
Any insight is appreciated
Andy
Did some google'ing....
Per an old Ls1Tech thread....didnt come up in search
"The old LS1 intake with the EGR setup is 12560688.
The Stock 2001-2002 F-body LS6 is 12561184.
The Z06 LS6 is 12573572.
These are the numbers stamped on the manifold"
Andy
Per an old Ls1Tech thread....didnt come up in search
"The old LS1 intake with the EGR setup is 12560688.
The Stock 2001-2002 F-body LS6 is 12561184.
The Z06 LS6 is 12573572.
These are the numbers stamped on the manifold"
Andy
Originally Posted by Gearhead1
I did a search and it said 12561184 was an '01 up F-Body LS6 intake. I don't know why it would have EGR provisions, though. Were the SLP LS6's w/EGR a modified factory LS6 intake??
Andy
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Originally Posted by bene
yeah looks like you've got SLP LS6 intake w/ egr provision.
Thanks for the replies.
Andy
Originally Posted by jlrz28
What did the egr tube look like when you cut it off? The SLP looks like this, i guess a flare fitting?
Here is my intake with EGR:
I did not cut anthing off. It was one bolt holding it into the intake. The SLP one appears to have recessed areas where the EGR pipe bolts to. If you look at my first pictures, my intakes top is flat with no recesses.
Andy
