I have a question for someone with a 98 LS1 with the engine out of the car and the wiring still intact in the engine compartment.

Let me know, thanks... oh and if this is the case and you can help me I will paypal $5 for the trouble.

Has to be a 98!!!

 

i dont have the engine out of the car but my heads are off and the wiring is still in the car. let me know if i can help you?

 

Engine is out of my 98. Whatcha need?

 

i have a 98 ls1 camaro with engine out how can i help u.

 

What are the wire colors on the cam sensor plug? I need the colors from the d/s to the p/s. Should be yellow...yellow/black and green. Left to right is fine.

 

Reminder: First one w/ the answer gets $5.

 

Driver side to passenger side:

Red
Pink w/black chaser
Black or brown w/white chaser

 

Why are mine different colors?

Yellow
Yellow/black
green


lol

 

Color blind? J/K..... I don't know what to tell you, man. Wish I was more help. Good luck.

 

Haha, that would be nice... I can't figure this out. The original owner of the car marked the three wires specifically "Cam position sensor" and they are the colors I mentioned. Is that not them? This is really going to **** me off if it is what hold sme up... is there a way to trial and error without screwing anything up?

 

I'll take a look at mine tonight to see what color they are. The harness and engine is out of the car but it shouldn't be a problem figuring out the right plug.

 

Are you 100% sure you are working with a 98' harness?

BTW, do you still need the fuel rail covers?

 

Those color wires are on the crankshaft position sensor. Click on the pic.
http://www.gearchatter.com/viewtopic8728.php

 

 

I would like to get them but they are a little too much for me to afford right now. Do you have to relocate the coils or what?

 

They go over the coils. Make me an offer sometime, if you decide you want them. They're just laying around. I'm easy. Good luck with your wiring. Let me know if you need me to look at more wires.

 

Thanks, looks like I'll need the luck. I will let everyone know how it goes.

 

If anyone knows the color of the crank sensor wires from the ground up as if it were installed that would be great. The male end would be facing the the rear of the car with the locking clip on the plug facing the p/s. Thanks!