MTI Clear Lid fitment
MTI Clear Lid fitment I was wondering how the fitment of the clear MTI lid is/was for all of you who have it, i just received mine and am having a hell of a time installing it, I've come to realize that the tabs on the rear of the lid don't seem to line up with the holes there supposed to slide into on the radiator shroud, I'll be calling MTI later but was just curious if this has happened before and if buying the black one would be a better bet, thanks
I've heard of a few people having issues with it, mine popped on with out a hint of problematic behavoir.
Oddly, all the problems seem to be with the clear lids, from what i've seen on this site. Mine is over a year old now still looks like new and can take off and pop on in a few seconds.
Oddly, all the problems seem to be with the clear lids, from what i've seen on this site. Mine is over a year old now still looks like new and can take off and pop on in a few seconds.
I had issues with my clear lid.
MTI was VERY reluctant to replace it, however they did.
I was told if I didn't like the fit I should have called as soon as I recieved it and they would have replaced it no problem.
Definitely call MTI.
MTI was VERY reluctant to replace it, however they did.
I was told if I didn't like the fit I should have called as soon as I recieved it and they would have replaced it no problem.
Definitely call MTI.
Originally Posted by Snuffles
I had issues with my clear lid.
MTI was VERY reluctant to replace it, however they did.
I was told if I didn't like the fit I should have called as soon as I recieved it and they would have replaced it no problem.
Definitely call MTI.
MTI was VERY reluctant to replace it, however they did.
I was told if I didn't like the fit I should have called as soon as I recieved it and they would have replaced it no problem.
Definitely call MTI.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
its problems with installation, not with the lid.
smooth bellows always present a problem. the fitment issues you are dealing with are the same on all lids, some people can get them easily, some people have problems.. push the tabs in the back down first.
smooth bellows always present a problem. the fitment issues you are dealing with are the same on all lids, some people can get them easily, some people have problems.. push the tabs in the back down first.
i had mine for about 3 years and it never fit quite right. i always had a place at the back that would never seal to the filter... i liked the way it looked alot, when it cracked along the back i should have ordered a new one instead of the TSP lid 
Installing was a PITA. That plastic does not want to flex. All you have to do is get it on the MAF, push the tabs down startign from far left moving to the right and slid it in. Man does it really seal to the lower box..
