fastss

Im just curious on what people on hear are running in the 1/4 miles with just bolt ons. (low 13's, high - mid - low 12's?) i know that some people are better than others at the lonch!! just wondering what these cars are really capable of with a good driver behing the wheel!!! Thanks!

99huggercamaro

iTrader: (21)

12.9 without headers

staringback05

iTrader: (8)

mid to high 12s is a good bet, and the majority of what i hear

navyblueSS

iTrader: (1)

My best so far is 12.62 @ 110 spinning with just bolt-ons. Just ordered new Drag Radials, Draglites, Skinnies, and Yank SS3600 so hoping for low 12's.

TORCHD 02 TA

iTrader: (39)

SEE SIG.. that was w/o cam and pulleye.. Also i was granny shifting the car and launched at 1500 RPMs feathering the cluth in fear of 10 bolt going BOOOOOOM!!

FU_I_AM_UltraZ

iTrader: (20)

check my dyno numbers in my signature. you need to have good tires. i've only managed a 13.1@114mph. i have a problem launching and when i rev it up like most with M6 and drop the clutch out, i spin. i know my car is capable of low 12s and maybe 11.9s if i get some wider rims and tires thatn the stock Z28 rims.

nikon1999

iTrader: (22)

12.3@109.8 w/bolt on's 17" bfg's and yank ss3600...had more in it, but decided i wanted a lot more power

pewter99ls1

I ran 12.95 @ 110mph with a 2.1 60 foot time. This was on 275/40 Goodyear GSD-3 radials and not powershifting. Also before the pulley and and Ls6 intake were put on.

TORCHD 02 TA

iTrader: (39)

you and i have the same HP for motor.. that was b4 my cam

EDIT: See Sig For Numbers

melchoir

iTrader: (4)

In Sig.

lsx24

iTrader: (45)

With 344 rwhp, I ran a corrected 12.9 @ 112 mph. 2.1 60'. M6

02BLK-SS

iTrader: (1)

stock na M6 bolt on's only full weight. 12.04 at 114 1.71 60' 4.10, mt-17"dr,ram flywheel, ram hd, pulley, lt's, cutout, lca, phb, ta, S60.

TORCHD 02 TA

iTrader: (39)

10 bolt you were cutting 1.7 60 fts

LilSlo1

iTrader: (3)

ET--Consistant 12.50's with a best of 12.46.
60 foot--Consistant low 1.70's best 1.67
mph--106-107

ET Streets
Engine is bone stock, the valve covers have never been off.

All other mods in sig.

YellowMonster87

iTrader: (4)

12.50's with around a 1.89 or 1.9 short time.....full exhaust and lid on stock eagles. ran em' all day long ....not sure what the new devil will run...well see come summer the track

02BLK-SS

iTrader: (1)

Yep kept the wrecker guys card in my wallet. had a custom three puk carbonic clutch that worked very well with stock pp and heavy flywheel. I could slip just right for a good 60' but now with ram hd clutch it just grabs and the 10 bolt went boom. ran same time with new heavy S60

Sluggish

iTrader: (10)

see sig.....did it without the LTs, ORY, and spray on 245 street tires

Jordan S.

iTrader: (17)

12.50@ 109 bolt ons. Was on ZR1's all around with 275 nittos out back. Would have gone faster with slicks.


1.7's all night on 10 bolt, its not stock but has been around for 2 years racing it every weekend.

Eatinstang4life

iTrader: (10)

if you consider a 9" bolt on with 4.30's your looking about 12.2's with all the other blot ons

fastlane02

iTrader: (10)

Ran a 1.82 60 ft, 12.8 1/4 but my 10 bolt gave up 100 ft before finish line go figure. I was hoping for 12.5 or so. full bolt on's with MT ETs 4.10 gears