LG Custom Y-pipe kicks $/hp ass, dyno within...
03-11-2002, 09:42 PM
#1
LG Custom Y-pipe kicks $/hp ***, dyno within... first the #'s
Then the price- Under 300$.
Note the almost 30lbft gain at 3000 rpm.
Then the best fact of all- Thanks to the fact that it has 2 3" bullet mufflers and unequal length sides, the car now has no 2000-3000 "Blat" resonance.
One of the best mods my car has ever seen.
370 rwlbft at 3000 rpm with 4.10s. <img src="gr_grin.gif" border="0">
Im a very pleased customer.
They replaced the Grott offroad Y with 2 3" unequal lenth sides, each containing a dynomax bullet. These two sides went into a flowmaster D-port collector into the 4" mufflex.
very, *very* pleased customer.
\chris
Then the price- Under 300$.
Note the almost 30lbft gain at 3000 rpm.
Then the best fact of all- Thanks to the fact that it has 2 3" bullet mufflers and unequal length sides, the car now has no 2000-3000 "Blat" resonance.
One of the best mods my car has ever seen.
370 rwlbft at 3000 rpm with 4.10s. <img src="gr_grin.gif" border="0">
Im a very pleased customer.
They replaced the Grott offroad Y with 2 3" unequal lenth sides, each containing a dynomax bullet. These two sides went into a flowmaster D-port collector into the 4" mufflex.
very, *very* pleased customer.
\chris
03-11-2002, 09:59 PM
#3
Re: LG Custom Y-pipe kicks $/hp ***, dyno within... Im still trying to get some from Louis. Im in Oregon and the car is in Dallas. It is at LG for a cage, and I convinced Louis to try out some stuff for a good Y-pipe while it was there. He has pics, and he is welcome to post them, but we are having a hard time with attachments in email, and I havent seen it yet. I understand I have about 4"s of ground clearance too, which is sweet.
Either Louis and LG can post em here, or Ill finally get them and post them on my personal website.
\chris
Either Louis and LG can post em here, or Ill finally get them and post them on my personal website.
\chris
03-11-2002, 10:38 PM
#4
Staging Lane
Join Date: Dec 2001
Location: Houston, TX
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Re: LG Custom Y-pipe kicks $/hp ***, dyno within... I noticed that you put the stock maf back on for the "after" run. What maf did you have on the "before" run and why did you change it?
03-11-2002, 11:57 PM
#7
10 Second Club
Join Date: Nov 2001
Location: So. Fl.
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Re: LG Custom Y-pipe kicks $/hp ***, dyno within... Visceral,
So did you buy this allready built,
or did they build it there for you?
I have Grotts, and the Y-pipe is the
bigest piece of $hit in the world. Can
I order his Y-pipe built for my grotts.
So did you buy this allready built,
or did they build it there for you?
I have Grotts, and the Y-pipe is the
bigest piece of $hit in the world. Can
I order his Y-pipe built for my grotts.
Trending Topics
03-12-2002, 12:13 AM
#8
Re: LG Custom Y-pipe kicks $/hp ***, dyno within... Sounds like LG is looking into making them for folks. I told them that there is a big demand for Grott Y-pipes, and they seemed very interested. Give them a call and ask for Chris. They are a sponsor here on the board.
I had mine built on the car at the shop and installed as part of the price <img src="gr_grin.gif" border="0">
\chris
I had mine built on the car at the shop and installed as part of the price <img src="gr_grin.gif" border="0">
\chris
03-13-2002, 11:09 AM
#11
TECH Regular
Join Date: Nov 2001
Location: Plano, TX
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
Re: LG Custom Y-pipe kicks $/hp ***, dyno within... hmm... that's awesome, I had asked if they'd make me one for Hooker LT's and they said no. I think I might go back up and ask again, that was a month or so ago. Awesome gains there, congrats. Gotta love LG. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
03-13-2002, 11:19 AM
#12
SSU Moderator
Join Date: Nov 2001
Location: Austin, TX
Posts: 4,857
Likes: 0
Received 0 Likes
on
0 Posts
Re: LG Custom Y-pipe kicks $/hp ***, dyno within... </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by pewter99SS:
<strong>hmm... that's awesome, I had asked if they'd make me one for Hooker LT's and they said no. I think I might go back up and ask again, that was a month or so ago. Awesome gains there, congrats. Gotta love LG. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">You'd probably do better emailing Louis directly. He's prolly the one that built Chris's. Did you talk to one of the dudes behind the counter?
Ryan
<strong>hmm... that's awesome, I had asked if they'd make me one for Hooker LT's and they said no. I think I might go back up and ask again, that was a month or so ago. Awesome gains there, congrats. Gotta love LG. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">You'd probably do better emailing Louis directly. He's prolly the one that built Chris's. Did you talk to one of the dudes behind the counter?
Ryan
03-13-2002, 10:53 PM
#14
Re: LG Custom Y-pipe kicks $/hp ***, dyno within... Chris,
You have mail
Pewter 99ss
We can make you a Y pipe. The cost is ~380$, chris (viscerl) supplied his own tubing and the collector along with the bullets which lowers his cost. If you tell me what you want, I CAN make it. All of our cutstom Ys are 100% TIG welded, and the utmost care is taken when building them The craftsmenship, Quality, and performance speaks for itself. If you would like removable cats, Let me know and I can do a similar FLP setup for you. We are going to be making these Ys for a number of headers, so for those of you looking for one, we can meet your needs, Even if you have a custom request it can be done.
Email me if you have any personal ?s Louisgigliotti@yahoo.com
-Louis Gigliotti Jr.
LG Motorports
You have mail
Pewter 99ss
We can make you a Y pipe. The cost is ~380$, chris (viscerl) supplied his own tubing and the collector along with the bullets which lowers his cost. If you tell me what you want, I CAN make it. All of our cutstom Ys are 100% TIG welded, and the utmost care is taken when building them The craftsmenship, Quality, and performance speaks for itself. If you would like removable cats, Let me know and I can do a similar FLP setup for you. We are going to be making these Ys for a number of headers, so for those of you looking for one, we can meet your needs, Even if you have a custom request it can be done.
Email me if you have any personal ?s Louisgigliotti@yahoo.com
-Louis Gigliotti Jr.
LG Motorports
