100% custom built LT's..............
Thread Starter
TECH Veteran
Joined: Dec 2001
Posts: 4,117
Likes: 0
From: Ft. Lauderdale, FL, USA
100% custom built LT's.............. Who does this and how much would that cost?
1 7/8" stepped to 2"
I see that ground clearance can be quite a bit better than all the LT's out there if they were angled better. I want them since my car will reamin lowered as is.
Anyone?
.
1 7/8" stepped to 2"
I see that ground clearance can be quite a bit better than all the LT's out there if they were angled better. I want them since my car will reamin lowered as is.
Anyone?
.
Originally Posted by silver-mod-o
Kooks will also build you a custom setup...
This company can build you some very nice top end header's. They build alot of the top end race teams exhaust systems. The owner has done alot of research on header design with different firing order's. My cam grinder knows the owner and informed me that the "LS1" firing order tends to like the tri-y headers. http://www.burnsstainless.com/
Originally Posted by DONAIMIAN
Kooks already makes a 1-7/8 stepped to 2inch headers. I wouldnt go with anything custom for the sole purpose of fitting closer to the floor unless you had solid motor mounts to stop them from hitting when the motor tq'ed over.
I already knew they built 1-7/8 to 2 steps but I was just throwing it out there if he insisted on having something built solely or his use and his particular car.
Trending Topics
Originally Posted by silver-mod-o
I already knew they built 1-7/8 to 2 steps but I was just throwing it out there if he insisted on having something built solely or his use and his particular car.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
TECH Veteran
Joined: Dec 2001
Posts: 4,117
Likes: 0
From: Ft. Lauderdale, FL, USA
Originally Posted by DONAIMIAN
Kooks already makes a 1-7/8 stepped to 2inch headers. I wouldnt go with anything custom for the sole purpose of fitting closer to the floor unless you had solid motor mounts to stop them from hitting when the motor tq'ed over.
.
Thread Starter
TECH Veteran
Joined: Dec 2001
Posts: 4,117
Likes: 0
From: Ft. Lauderdale, FL, USA
Originally Posted by silver-mod-o
I already knew they built 1-7/8 to 2 steps but I was just throwing it out there if he insisted on having something built solely or his use and his particular car.
My 1 7/8" Grots are pretty beat to ****, both sides. Couple little spots almost worn through.
.