Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Changing my Dynomax bullets for Borlas in my duals

Thread Tools
 
Search this Thread
 
Old 05-29-2003, 05:22 PM
  #1  
TECH Addict
Thread Starter
 
quickWS6's Avatar
 
Join Date: Dec 2001
Location: Auburn, AL
Posts: 2,337
Likes: 0
Received 0 Likes on 0 Posts
Default Changing my Dynomax bullets for Borlas in my duals

I want to quiet my car down some. I have 3" x-pipe with 16" Dynomax mufflers. I want to replace them with Borlas. Do I want the XR1 Race mufflers or the Sportsman mufflers? Both are 4.5" tall. Does anyone think I could fit some 12" Dynomax mufflers before the x-pipe too? Thanks!
Old 05-29-2003, 10:47 PM
  #2  
TECH Addict
 
MOBE's Avatar
 
Join Date: Feb 2002
Location: Bailey, Co
Posts: 2,031
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Changing my Dynomax bullets for Borlas in my duals

Get some Moroso Spiral-flow mufflers. They are quieter than bullets, and sound better IMO.

http://www.jegs.com/cgi-bin/ncommerc...mp;prmenbr=361
Old 05-30-2003, 12:59 PM
  #3  
TECH Addict
Thread Starter
 
quickWS6's Avatar
 
Join Date: Dec 2001
Location: Auburn, AL
Posts: 2,337
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Changing my Dynomax bullets for Borlas in my duals

Those sound good, but they look like they'd be pretty restrictive.
Old 05-30-2003, 01:20 PM
  #4  
Launching!
iTrader: (1)
 
Sonny's Avatar
 
Join Date: Nov 2001
Location: DFW
Posts: 276
Likes: 0
Received 0 Likes on 0 Posts

Default Re: Changing my Dynomax bullets for Borlas in my duals

I did use 2 xr-1 sportsman (part# 40085) 15x5x3 for my true duals. it sounded very deep and rumbling.
I had to switch them out b/c of some ground clearance.
Old 05-30-2003, 01:27 PM
  #5  
TECH Enthusiast
 
Raven's Avatar
 
Join Date: Jan 2002
Location: Lincolnwood IL
Posts: 595
Likes: 0
Received 0 Likes on 0 Posts

Default Re: Changing my Dynomax bullets for Borlas in my duals

I've got a Borla XR1 Sportsman muffler in place of my Loudmouth resonator Nice sound, very litltle interior resonance, almost no rasp - and still pretty ferocious at WOT Just a great performing muffler, IMO.
Old 05-30-2003, 01:58 PM
  #6  
TECH Addict
 
MOBE's Avatar
 
Join Date: Feb 2002
Location: Bailey, Co
Posts: 2,031
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Changing my Dynomax bullets for Borlas in my duals

Those sound good, but they look like they'd be pretty restrictive.
Thay aren't as restrictive as you may think they are. The "spiral" is wrapped around an 1 1/2" straight through pipe. It flows maybe a hair less just than a bullet and with the "spiral" design it creates a little more back pressure than the bullets on the low and mid-range. Another guy with the same set up I have, dynoed open headers and then x-pipe w/ spiral-flows dumped. Peak hp and tq were exactly the same, and he pick up low and mid tq across the board.
Old 05-30-2003, 02:02 PM
  #7  
LS1TECH Sponsor
iTrader: (4)
 
Magnus's Avatar
 
Join Date: Nov 2001
Location: Chicago, IL
Posts: 2,404
Likes: 0
Received 0 Likes on 0 Posts

Default Re: Changing my Dynomax bullets for Borlas in my duals

How much more do the spirals quiet it down vs open dumps?
Old 05-30-2003, 02:36 PM
  #8  
TECH Addict
 
MOBE's Avatar
 
Join Date: Feb 2002
Location: Bailey, Co
Posts: 2,031
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Changing my Dynomax bullets for Borlas in my duals

You will definitely hear a very noticeable difference over open dumps. Even over bullets you will hear a noticeable difference. The spirals also gave it a little more of a "tuned" (not so raw) sound.
Old 05-30-2003, 03:39 PM
  #9  
TECH Addict
Thread Starter
 
quickWS6's Avatar
 
Join Date: Dec 2001
Location: Auburn, AL
Posts: 2,337
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Changing my Dynomax bullets for Borlas in my duals

Alright, thanks for the info. I just ordered a pair of them. Even if I don't like them, they are about 25% of the price I would pay for a pair of Borla XR1 race mufflers. Hopefully they'll be just what I want.
Old 05-30-2003, 04:17 PM
  #10  
TECH Addict
 
MOBE's Avatar
 
Join Date: Feb 2002
Location: Bailey, Co
Posts: 2,031
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Changing my Dynomax bullets for Borlas in my duals

Let me know what you think of them, good or bad. Hopefully you'll like them.




All times are GMT -5. The time now is 07:26 AM.