Looking at buying this setup. will there have to be any fabrication to this kit to get it to fit with a umi torque arm and the relocation kit? anyone that has this exhaust comments on how u like it and what u think are very much appreciated. sound clips...pretty much anything to do with it would be cool. thanx...

 

There shouldn't be any modifications needed with a torque arm and the dual kit. I don't have the setup but I'm confident you won't have any issues since my BMR torque arm gained clearance near my old TSP y pipe.

 

appreciate the help. anyone with any comments bout the sound and what they like, dont like...

 

This may not help much, but here is my Bassani system.

https://ls1tech.com/forums/showpost....&postcount=233

 

This is mine...

Video clip:
http://www.fquick.com/videos/Exhaust_video/4431

Pictures

 

Do you or Bene happen to have any more vids of the cars driving with this exhaust? I wanna get some more samples before I make a final decision to buy or not.

 

thanx Bigkap...was bout to post the same thing. would like to hear some vids of drivin down the road also. maybe a good stomp on the pedal too.

 

plus r u runnin aluminized or stainless?

 

so long as it keeps the torque arm in the stock location, i don't see a problem with it.

here's with the stock ls1 and stock exhaust manifolds
http://www.centralfloridastreetcars....006/mrr231.wmv

with the 408 motor
http://www.centralfloridastreetcars....08nitrous1.wmv

little bit of street action
http://www.youtube.com/watch?v=owf0FewBkPM

wife's car
http://www.centralfloridastreetcars....oberttrack.wmv
http://www.centralfloridastreetcars....eos/1230na.wmv

 

Here is the extended version of the video clip
http://www.fquick.com/videos/LPM_Z28/4458

One of my runs at the track
http://www.fquick.com/videos/1_4_mile_run__6/1795