flowtech longtubes,pacesetter ory,borla=
Thread Starter
Staging Lane
Joined: Oct 2007
Posts: 50
Likes: 0
flowtech longtubes,pacesetter ory,borla= lots of rattling from the ory against the floor board,what can i do?thinking of selling the ory and catback for true duals,but will i have the same problem because of the headers?
Thread Starter
Staging Lane
Joined: Oct 2007
Posts: 50
Likes: 0
Launching!
Joined: Apr 2006
Posts: 213
Likes: 0
From: Back to Newport News
BFH=big ******* hammer, which means beating the **** out of your floorboards and anything else in the way so your pipes won't touch them and rattle. If I were you, dont do this caveman ****. Spend the extra time and do the prothane mounts. I did it with the LT's already installed. It's definately worth it once everything is said and done.
BFH=big ******* hammer, which means beating the **** out of your floorboards and anything else in the way so your pipes won't touch them and rattle. If I were you, dont do this caveman ****. Spend the extra time and do the prothane mounts. I did it with the LT's already installed. It's definately worth it once everything is said and done.
-J
Trending Topics
sounds like you need some new muffler bearings!!
http://kalecoauto.com/index.php?main...products_id=10
http://kalecoauto.com/index.php?main...products_id=10
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Launching!
Joined: Apr 2006
Posts: 213
Likes: 0
From: Back to Newport News
You're right, sometimes you gotta do what you gotta do to make it work. Prothane mounts are a good choice though. I was real skeptical before I did them because I read how much of a pain in the *** they are to install with LT's in the way. It was a hard job, but no more banging ORY! Like I stated earlier, you will thank yourself when it's all said and done.
I did prothane mounts too... well, after getting one in I said **** it and brought it to my friend's shop to do the other 
I'd have rather swapped the cam again than do motor mounts. Any day.
-J
I'd have rather swapped the cam again than do motor mounts. Any day.-J
i had the same prob. with my flowtechs and their y pipe lots of banging at takeoff and slowing down, my solution true duals! i tried the heater hose mod, and a rubber hanger like themufflex but it still rattled, do it i love them
