BLUEBYU

iTrader: (1)

It is nice to do the work when you are doing a head or cam swap... I did mine when I swapped my heads. Also be patient and it will look pretty good...expand the braiding to it's fullest diameter and work out from the center. You also need to figure out which connection to do first...need to get the clamps reachable and hidden.

Good Luck with it....you will be happy.

Jorday

How much was the water pump and where can you get it?

Thanks,
Jordan

highgmc

got mine from summit for $499 and $8 for the stat

BLUEBYU

iTrader: (1)

Got it from Mark at Raging Motorsports-------->
Better price than $499!!!
Call him he is getting quite a few in...in different colors...
They are going up in price from what I have heard so call him now to see if you can get one with his order...
Good luck.

pimpmaro

Yeah, I've seen those fake braided connectors before, but I'm interested in the real ones if it's not too much of a PITA. It would make it SOOOOOOOOOOO much easier when working on the engine... just cuz hose clamps and I have historically had some problems.... hehehe

Reckless

iTrader: (9)

Curious what kind of paint you used on the FRCs and intake. Looks almost like that anodized stuff from a can. Can you elaborate? OBTW, the WP looks awesome

BLUEBYU

iTrader: (1)

I have a combination of real annodized finishes and the paint system from Metal Cast. It takes some time to get it right....the undercoat that gives the surface an aluminum look I used by itself on things like the STB.
Thanks for the props guys!

Reckless

iTrader: (9)

So where is the Metal Cast stuff available? Thanks BTW

BLUEBYU

iTrader: (1)

O'Reilly's..... they have it in red also.
The base paint I referred to is called the "Ground" coat.

tbyrne

iTrader: (15)

Looks very nice under there!!!

Here is a close up pic of the black version -

BLUEBYU

iTrader: (1)

Thanks for the prop. I think the black is awesome!! I believe my bro and Mark are getting it in that color.