Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

gm hot cam ?

Thread Tools
 
Search this Thread
 
Old 10-26-2008 | 05:50 PM
  #21  
LavaRock's Avatar
On The Tree

 
Joined: Jul 2008
Posts: 128
Likes: 0
Default

A tune is a must! Without one even the mildest cam will sound nasty, but occassionally you'll think the car will quit. I have an older hot cam which nets 365hp/390tq after tuning. It sounds pretty mild now. I want more so heads and a more aggressive cam combo is in my future.
Old 10-26-2008 | 06:02 PM
  #22  
duff70's Avatar
Teching In
 
Joined: May 2008
Posts: 39
Likes: 0
From: arlington, wa
Default

i have the hotcam for it to really run good idle wise is to tune it to idle at 850 to 900 rpms.
Old 10-26-2008 | 07:18 PM
  #23  
tpain's Avatar
Thread Starter
On The Tree

 
Joined: Jun 2006
Posts: 183
Likes: 0
From: Knoxville, TN.
Default

i think i will be ordering mine this week, if all goes well.
Old 10-26-2008 | 07:19 PM
  #24  
johnLs1camaro's Avatar
TECH Fanatic
iTrader: (28)
 
Joined: Nov 2006
Posts: 1,757
Likes: 4
From: NA,Indiana/louisville, ky
Default

so did you decide on a gm hot cam??
Old 10-26-2008 | 08:12 PM
  #25  
LavaRock's Avatar
On The Tree

 
Joined: Jul 2008
Posts: 128
Likes: 0
Default

Originally Posted by duff70
i have the hotcam for it to really run good idle wise is to tune it to idle at 850 to 900 rpms.
Mine originally idled at 800 (M6) and now idles at about 900.
Old 10-26-2008 | 09:08 PM
  #26  
tpain's Avatar
Thread Starter
On The Tree

 
Joined: Jun 2006
Posts: 183
Likes: 0
From: Knoxville, TN.
Default

Originally Posted by johnLs1camaro
so did you decide on a gm hot cam??
yeah i work for a chevy dealer so get it should be no problem, and a buddy of mine is a mechcanic so getting it put in is np.




All times are GMT -5. The time now is 07:10 AM.