compare rocker arms
Thread Starter
TECH Veteran
iTrader: (6)
Joined: Feb 2002
Posts: 4,766
Likes: 0
From: Phoenix, AZ USA
compare rocker arms I need a set of adjustable shaft mount rockers. What are the differences (quality and fit) of these:
1) Jesel Shaft Mounted Roller Rockers $995
2) Comp Cams Shaft Mounted Roller Rocker Arm $835
3) T&D Shaft Mounted Roller Rocker Arm $835
The max RPM will be 7600 and they need to go under "gutted" stock valve covers (I milled out ALL the insides of the 99+ valve covers) as I don't want to do spacers (or aftermarket covers).
1) Jesel Shaft Mounted Roller Rockers $995
2) Comp Cams Shaft Mounted Roller Rocker Arm $835
3) T&D Shaft Mounted Roller Rocker Arm $835
The max RPM will be 7600 and they need to go under "gutted" stock valve covers (I milled out ALL the insides of the 99+ valve covers) as I don't want to do spacers (or aftermarket covers).
What time frame are you looking at? We're trying to get the Patriot rockers ready for release pretty soon 
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Trending Topics
I can shift faster than you.
iTrader: (21)
Joined: Nov 2001
Posts: 5,133
Likes: 0
From: Baton Rouge, LA
The only experience I have first hand is with the T&Ds. They are an excellet rocker and I would highly recommend them. You do have to run a spacer for them to fit, though.
Jason
Jason
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Who makes a valve cover that will clear all of these rockers that is REASONABLY priced?
Who else makes a valve cover that will clear all of these?
A valve cover is a valve cover, unless it is clear and dosen't get blemished over time, why pay more?
Who else makes a valve cover that will clear all of these?
A valve cover is a valve cover, unless it is clear and dosen't get blemished over time, why pay more?
I can shift faster than you.
iTrader: (21)
Joined: Nov 2001
Posts: 5,133
Likes: 0
From: Baton Rouge, LA
Originally Posted by masterdill
Who makes a valve cover that will clear all of these rockers that is REASONABLY priced?
Who else makes a valve cover that will clear all of these?
A valve cover is a valve cover, unless it is clear and dosen't get blemished over time, why pay more?
Who else makes a valve cover that will clear all of these?
A valve cover is a valve cover, unless it is clear and dosen't get blemished over time, why pay more?
http://www.thunderracing.com/index.c...yid=1114#P3397
TECH Fanatic
Joined: Jun 2003
Posts: 1,070
Likes: 0
From: Further South than Hell
TTT with masterdill.
But on same note I run Comps Shaft Rockers with a set of Patriot LS1 stage II and they fit under gutted 01 valve covers.
I have even been called a liar for making this statement but who cares, it works for me. Why? I can maybe speculate that the clearance issue is super minimal and that my patriot's heads have a slightly taller lip, but I never measured and compared. all i know is that they fit on my setup.
But on same note I run Comps Shaft Rockers with a set of Patriot LS1 stage II and they fit under gutted 01 valve covers.
I have even been called a liar for making this statement but who cares, it works for me. Why? I can maybe speculate that the clearance issue is super minimal and that my patriot's heads have a slightly taller lip, but I never measured and compared. all i know is that they fit on my setup.
Thread Starter
TECH Veteran
iTrader: (6)
Joined: Feb 2002
Posts: 4,766
Likes: 0
From: Phoenix, AZ USA
Originally Posted by 4thGENRETARD
TTT with masterdill.
But on same note I run Comps Shaft Rockers with a set of Patriot LS1 stage II and they fit under gutted 01 valve covers.
I have even been called a liar for making this statement but who cares, it works for me. Why? I can maybe speculate that the clearance issue is super minimal and that my patriot's heads have a slightly taller lip, but I never measured and compared. all i know is that they fit on my setup.
But on same note I run Comps Shaft Rockers with a set of Patriot LS1 stage II and they fit under gutted 01 valve covers.
I have even been called a liar for making this statement but who cares, it works for me. Why? I can maybe speculate that the clearance issue is super minimal and that my patriot's heads have a slightly taller lip, but I never measured and compared. all i know is that they fit on my setup.
hmm...so you were able to get the comps under gutted covers
how are the comps working for you? I was really looking at those but had not been able to find anyone who has used them.
