Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Engine Power Systems

Thread Tools
 
Search this Thread
 
Old Sep 9, 2009 | 11:56 AM
  #1  
95Firebirdkeith's Avatar
Thread Starter
Teching In
 
Joined: Jul 2003
Posts: 29
Likes: 0
Default Engine Power Systems

Id just like to take a second to thank Geoff from EPS. My brother and I just did an EPS cam 226 234 113+3 on my 2000 Vette. I also got a fantastic mail order tune from him that i had only minor adjustments to make. Id recomend anyone to order andthing from EPS. Video to come.
Keith

Last edited by 95Firebirdkeith; Sep 9, 2009 at 12:04 PM.
Reply
Old Sep 9, 2009 | 12:00 PM
  #2  
Red99TA's Avatar
TECH Addict
20 Year Member
iTrader: (11)
 
Joined: Oct 2003
Posts: 2,442
Likes: 6
From: Topeka, KS
Default

I ordered my custom spec cam through Geoff and he was a pleasure to work with. Had him put the cam on the cam doctor once it came in from Comp too.
Reply
Old Sep 9, 2009 | 12:20 PM
  #3  
Kurtomac's Avatar
10 Second Club
iTrader: (5)
 
Joined: Apr 2003
Posts: 1,220
Likes: 0
From: Okinawa, Japan
Default

My brother Keiths car purrs like a kitten at idle and driveability is superb yet screams like a pissed off tom cat when you mash the gas...Geoff did a fantastic job getting the mail tune near perfect...I only had to change the base air table and the car runs like stock...you can take off with his 342s right off idle...no bucking/surging ANYWHERE...makes me want to put a mild cam in my car because they drive so well...it pulls great vacuum idles at 47kpa at 850 rpm...drives great ac on and off...the valvetrain is probably the quietest ive done with the PAC 1518s and stock rockers...install was a breeze with the valvespring tool my dad made me.
We also installed a TCI underdrive pulley and a hypertech 160 thermostat...so now she runs nice and cool going down the interstate.
I just spoke with Geoff hopefully Keith will make the trip down from Little Rock to visit Geoff shortly to get it on the dyno and dial in WOT fueling and timing...shooting for 400 rwhp with his current mod list in his sig.
Hope youre happy with the install Keith!

Kurtomac
Reply
Old Sep 9, 2009 | 12:20 PM
  #4  
fortmyerspolice's Avatar
TECH Resident
iTrader: (7)
 
Joined: Jun 2006
Posts: 908
Likes: 0
From: Fort Myers FL
Default

Yup, same here with my 226/230, EPS lobes are nice. My car made 410hp and 386torque.
Reply
Old Sep 9, 2009 | 01:46 PM
  #5  
Patrick G's Avatar
LS1 Tech Administrator
20 Year Member
Photogenic
iTrader: (14)
 
Joined: Nov 2001
Posts: 8,246
Likes: 34
From: Victoria, TX
Default

Major props to Geoff for his cam lobes and his mad tuning skills. You are definitely in good hands there.
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.

Reply
Old Sep 9, 2009 | 02:23 PM
  #6  
FastB's Avatar
Launching!
iTrader: (11)
 
Joined: May 2007
Posts: 231
Likes: 0
From: Houston, TX
Default

got mine from him too!
Reply
Old Sep 9, 2009 | 02:33 PM
  #7  
lilbuddy1587's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: May 2004
Posts: 1,691
Likes: 0
From: Mesa, Arizona
Default

Looking to put his 222/226 113 cam into my GTO and seeing results/good comments like this are promising.
Reply
Old Sep 9, 2009 | 02:47 PM
  #8  
Patrick G's Avatar
LS1 Tech Administrator
20 Year Member
Photogenic
iTrader: (14)
 
Joined: Nov 2001
Posts: 8,246
Likes: 34
From: Victoria, TX
Default

Originally Posted by lilbuddy1587
Looking to put his 222/226 113 cam into my GTO and seeing results/good comments like this are promising.
They'll be even better if you put a FAST intake on it. j/k
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.

Reply
Old Sep 9, 2009 | 03:20 PM
  #9  
lilbuddy1587's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: May 2004
Posts: 1,691
Likes: 0
From: Mesa, Arizona
Default

Originally Posted by Patrick G
They'll be even better if you put a FAST intake on it. j/k
AND SOME TFS HEADS!!!!1111

Reply
Old Sep 9, 2009 | 10:32 PM
  #10  
95Firebirdkeith's Avatar
Thread Starter
Teching In
 
Joined: Jul 2003
Posts: 29
Likes: 0
Default

http://www.youtube.com/user/budjrfan.../0/W4R7bQG5ofg
heres a link
Reply
Old Sep 9, 2009 | 10:45 PM
  #11  
adam1803's Avatar
TECH Fanatic
iTrader: (65)
 
Joined: Jun 2006
Posts: 1,188
Likes: 0
From: OKC
Default

ordered my Pat G cam from EPS as well. Geoff was a pleasure to do business with.
Reply
Old Sep 9, 2009 | 10:49 PM
  #12  
xlcooplx's Avatar
TECH Resident
15 Year Member
iTrader: (26)
 
Joined: Feb 2006
Posts: 781
Likes: 0
From: myrtle beach, sc
Default

And my PatG spec'd cam should be enroute to Geoff within the next week to get slapped on the CamPlusPro. Cant wait to get it in!
Reply
Old Sep 10, 2009 | 08:40 AM
  #13  
Kurtomac's Avatar
10 Second Club
iTrader: (5)
 
Joined: Apr 2003
Posts: 1,220
Likes: 0
From: Okinawa, Japan
Default

you can barely hear the cam in the vid keith
for the 2nd page viewers heres the link to the vid again
http://www.youtube.com/user/budjrfan.../0/W4R7bQG5ofg
Keiths gonna have to get used to the new power band...I was trying to get some logs and he kept shiftin at 5800...run it to 6600 keith!
Reply
Old Oct 3, 2009 | 07:28 AM
  #14  
Dom's Avatar
Dom
TECH Fanatic
iTrader: (2)
 
Joined: Nov 2001
Posts: 1,380
Likes: 1
From: Chicago
Default

Originally Posted by lilbuddy1587
Looking to put his 222/226 113 cam into my GTO and seeing results/good comments like this are promising.
Make sure to post up your results. I'm thinking of the same 222/226. I'm just undecided on the LSA and advance/retard.
Reply
Old Oct 10, 2009 | 01:13 PM
  #15  
'02 WS6's Avatar
TECH Fanatic
15 Year Member
Photogenic
Photoriffic
iTrader: (73)
 
Joined: Aug 2006
Posts: 1,580
Likes: 13
From: Texas
Default

Originally Posted by adam1803
ordered my Pat G cam from EPS as well. Geoff was a pleasure to do business with.
My Pat G cam was too.

x2 on Geoff, definitely a great guy to deal with.

Reply




All times are GMT -5. The time now is 02:21 AM.