Announcing a new LS-series "How-to" publication:
#141
kind of disappointed, Misleading
Just got mine in the mail, the book starts out great but once it gets to the heads part it just speeds to the end?? Like they ran out of time and rushed the end, does not cover intake, fuel system or exhaust...at all!! front cover has "induction and exhaust" listed and on back cover it says "topics include intake manifold,fuel system, and header selection"?? this is clearly not the case at all!
There is absolutely nothing about intakes, headers or fuel system..I mean nothing! It goes from installing the valley plate to conclusion???
Overall the book is awesome in the short block area, but rushes through everything else and just leaves you hanging when it comes to intake, exhaust and fuel system.
Good book but someone messed up when they designed the front and back cover.
Thanks
T
There is absolutely nothing about intakes, headers or fuel system..I mean nothing! It goes from installing the valley plate to conclusion???
Overall the book is awesome in the short block area, but rushes through everything else and just leaves you hanging when it comes to intake, exhaust and fuel system.
Good book but someone messed up when they designed the front and back cover.
Thanks
T
#142
Thread Starter
LSxGuy widda 9sec Mustang
iTrader: (12)
Joined: Nov 2001
Posts: 3,043
Likes: 0
From: Texas and Qatar
Thanks for the feedback, I was wondering when someone would point that out actually. I do believe whoever had a hand in the front cover text and rear cover text was on crack as it was always intended to be an internal engine book (oil pan to valve covers), nothing else would even fit. The F+R covers are done way before the book for advertising purposes, but I myself did not see it until a month after I finished it. After a few phone calls to book company (I wanted the already printed covers changed); I then actually quickly wrote an extra chapter including those topics but it was too last minute and there just wasn't any room either. I was over the text and image limit already (176 pages is IT). That chapter ended up rewritten with both LT1 and LS1 information and squeezed in my F-body book instead. If I'm ever allowed a revision, that is one thing I will demand to be changed though along with a few smaller items.
I think it covers the How-To portion very well, in fact if I were to rewrite it again in 2-3 years it would be identical. Much of the information I added is from repeat problem areas I get phone calls from ("unfamilar to LSx" installers), so much so that I have to block 99% of the calls to the shop to get any work done on LS vehicles!
I think it covers the How-To portion very well, in fact if I were to rewrite it again in 2-3 years it would be identical. Much of the information I added is from repeat problem areas I get phone calls from ("unfamilar to LSx" installers), so much so that I have to block 99% of the calls to the shop to get any work done on LS vehicles!
#143
Thread Starter
LSxGuy widda 9sec Mustang
iTrader: (12)
Joined: Nov 2001
Posts: 3,043
Likes: 0
From: Texas and Qatar
Yea I think I'll order this book too when I have some spare cash. I'm really looking forward to the Engine Swap Manual as I'm in the very beginning of my own conversion. Do you touch on S-10 swaps at all? Either way from what you mentioned it seems the book going to be a very good reference for any swap in general.
I've only signed my familys copies and about 3 others. If you ever catch up to me at a race or any other event I'd be happy to sign it. My penmanship has severely deteriorated over the years though, you might "only" want my signature.
I am hearing towards the end of summer. I should get my own copy in a month or two.
Last edited by -Joseph-; 04-30-2010 at 10:36 PM.
#145
Thread Starter
LSxGuy widda 9sec Mustang
iTrader: (12)
Joined: Nov 2001
Posts: 3,043
Likes: 0
From: Texas and Qatar
Just for you Facebook addicts (I am one, admitting it is the first step): How to Build and Modify GM LS-Series Engines
Don't know why I didn't start that group sooner.. I always wanted to have one and now since I just finished my 3rd manuscript I had a small amount of extra time to click a few buttons. Anyway for the guys who have used the books for engine builds or heads/cam swaps or any other internal LS engine modifications, please share some pics!
Also please post any feedback. If there are any questions related to that book I can also try to address them on that page. Thanks!
Don't know why I didn't start that group sooner.. I always wanted to have one and now since I just finished my 3rd manuscript I had a small amount of extra time to click a few buttons. Anyway for the guys who have used the books for engine builds or heads/cam swaps or any other internal LS engine modifications, please share some pics!
Also please post any feedback. If there are any questions related to that book I can also try to address them on that page. Thanks!
#151
Thread Starter
LSxGuy widda 9sec Mustang
iTrader: (12)
Joined: Nov 2001
Posts: 3,043
Likes: 0
From: Texas and Qatar
Thanks!!
#154
Thread Starter
LSxGuy widda 9sec Mustang
iTrader: (12)
Joined: Nov 2001
Posts: 3,043
Likes: 0
From: Texas and Qatar
Sweet! Let me know how you like this LSx manual.