trex install complete
well it is only half tuned so idle is right around 1050, there is still a couple of hours of tuning, from what ive heard and read these cams normally idle around 900, ill just have to wait and see what the final rpm idle will be. its a speed density tune as well.
i will have to say though i am anxious to see the ole bitch run.
thinking the cam may be too big (t-rex) for what i am wanting to do with the LS swap in my Camaro.
but we will have to see.
thinking the cam may be too big (t-rex) for what i am wanting to do with the LS swap in my Camaro.
but we will have to see.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo [QUOTE=mred;13033241]i will have to say though i am anxious to see the ole bitch run.
thinking the cam may be too big (t-rex) for what i am wanting to do with the LS swap in my Camaro.
but we will have to see.[/Q
if your gonna run the bottle i think you would need a smaller cam?
thinking the cam may be too big (t-rex) for what i am wanting to do with the LS swap in my Camaro.
but we will have to see.[/Q
if your gonna run the bottle i think you would need a smaller cam?
na,i just want something that runs real good and sounds good as well.
something like this.
http://www.youtube.com/watch?v=LpU-CC5OOM0
something like this.
http://www.youtube.com/watch?v=LpU-CC5OOM0
Teching In
Joined: Feb 2010
Posts: 21
Likes: 0
Just a fiy. i have/had a trex cam in my 02 and it sounds great/ ran great. 400rwhp. but it is hard on ****. real hard. the cam has been in the car less that 6000 miles. and never raced (car only has 10000 miles on it.) i had the car start back fireing though the intake. figure a spring broke but i figured wrong. the dam bottom of the lifter broke in pieces. just tore it appart today and found the problem. **** suck. well ur car sounds great and hope u have better luck than me. and ya i had my car tuned by bluecat and it idle at 900 rmp. like i said good luck.
Just a fiy. i have/had a trex cam in my 02 and it sounds great/ ran great. 400rwhp. but it is hard on ****. real hard. the cam has been in the car less that 6000 miles. and never raced (car only has 10000 miles on it.) i had the car start back fireing though the intake. figure a spring broke but i figured wrong. the dam bottom of the lifter broke in pieces. just tore it appart today and found the problem. **** suck. well ur car sounds great and hope u have better luck than me. and ya i had my car tuned by bluecat and it idle at 900 rmp. like i said good luck.
Teching In
Joined: Feb 2010
Posts: 21
Likes: 0
ya i am going to get it fixed this week. haven dicieded if i am going back to the trex or not. yes it did **** up the cam. which sucks. the car only ran maybe 20 sec after it started back firing. and i shut it down and trailored it home. the car wasnt running over 3000rpm when it happen either. thats one reason i am on here is to find a different cam maybe and just get ideas. but who knows. i may go back to the same thing. ya i drove the car at least 100 miles a day. but mostly highway driving. well i did drive the car hard kinda but no harder than i drove a stock lt1 car and it handled the abuse for 5 years before it spun 1 and 2 bears at the race track. but i didnt bet the ls1 either. did maybe 2 burnouts.
ya i am going to get it fixed this week. haven dicieded if i am going back to the trex or not. yes it did **** up the cam. which sucks. the car only ran maybe 20 sec after it started back firing. and i shut it down and trailored it home. the car wasnt running over 3000rpm when it happen either. thats one reason i am on here is to find a different cam maybe and just get ideas. but who knows. i may go back to the same thing. ya i drove the car at least 100 miles a day. but mostly highway driving. well i did drive the car hard kinda but no harder than i drove a stock lt1 car and it handled the abuse for 5 years before it spun 1 and 2 bears at the race track. but i didnt bet the ls1 either. did maybe 2 burnouts.
Well so far I haven't had any problems with the T Rex. I've put about 3,000 miles on the car since i bought it, and i go wot all the time, pounding thru the gears. I know my buddy, the previous owner, put way many more miles on it with that cam too.
If anything, my rear end doesn't like it, cuz it's whining all the time LOL
If anything, my rear end doesn't like it, cuz it's whining all the time LOL
Well so far I haven't had any problems with the T Rex. I've put about 3,000 miles on the car since i bought it, and i go wot all the time, pounding thru the gears. I know my buddy, the previous owner, put way many more miles on it with that cam too.
If anything, my rear end doesn't like it, cuz it's whining all the time LOL
If anything, my rear end doesn't like it, cuz it's whining all the time LOL