Not completely satisfied
#22
11 Second Club
iTrader: (7)
I almost quoted you and said that, but wasn't sure what intake the OP was running. If you are running a ls1 intake OP....scratch that ASAP. ls6 and the car will feel much better, especially with a good tune. Also..I don't think his set up will make 400 with a ls1 intake. Maybe 380 or 390. Those intakes suck.
#25
On The Tree
Thread Starter
iTrader: (5)
Join Date: Nov 2009
Location: Sarver PA 16055
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Well, i took the car back to my tuner today, to find out the map sensor is barely reading, its reading at 10 ... all the time, brought it back home, and a buddy of my came over to help swap out the map sensor, and found that all the wires are messed up. My tuner and him both told me, it could hold me back 100hp with it running incorrectly being in limp mode. I'm hoping thats true and tomarrow I will be smiling, did anyone ever have a similar problem?
#27
On The Tree
Thread Starter
iTrader: (5)
Join Date: Nov 2009
Location: Sarver PA 16055
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Also to the intake question, unfortunitely yes i am still running my stock ls1 intake, ran out of money, i hope that this MAP problem will be a night and day difference, and i can get back to concentrating on an intake.
#31
TECH Senior Member
iTrader: (8)
Not trying to nitpick but on the FAST website they advertise the 102 as being worth 20hp over the LS1 and 15hp over the LS6. That is obviously ONLY 5hp difference... Yes the LS6 is better and will support a few more hundred rpm than a LS1 it is just not the POWER KILLER many say it is....
#33
11 Second Club
iTrader: (7)
Not trying to nitpick but on the FAST website they advertise the 102 as being worth 20hp over the LS1 and 15hp over the LS6. That is obviously ONLY 5hp difference... Yes the LS6 is better and will support a few more hundred rpm than a LS1 it is just not the POWER KILLER many say it is....
#36
On The Tree
iTrader: (1)
Not trying to nitpick but on the FAST website they advertise the 102 as being worth 20hp over the LS1 and 15hp over the LS6. That is obviously ONLY 5hp difference... Yes the LS6 is better and will support a few more hundred rpm than a LS1 it is just not the POWER KILLER many say it is....
#38
TECH Resident
iTrader: (14)
But when a cam is involved, and wanting the air, especially up top, I could see a 20 hp peak with a ls6 over a ls1 mani. I would love to see back to back dynos of a set up similar to mine, or even the ops, using ls1 mani, ls6 mani, and any of the unported FAST manis, then the same FAST ported. But that is a lot of time involved for a shop to do, so very doubtful it will happen.
Do you believe everything you read on the internet? Of course not. While I could definitely see a 5hp gain in just a stock/basic bolt-on application, we're talking about a cam that requires more RPM, and a better flowing set of heads. With that cam tied in, I think 10whp is definitely reasonable.