Deciding on cams!!
#22
Teching In
Thread Starter
Join Date: May 2010
Location: Gibsonville, NC
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
yea... but im not so worried about it being real streetable it will be daily driven either way im wanting something that will make good high power. Like to have it to where it makes mid to high range power easy really want close to 400 or more but not sure of the cam to buy i really like ms4 i just figured that the ms4 would be a little to big
#27
Pay Patrick G to spec a camshaft for you. Only $25 bucks and the custom grind will fit your needs.
You are probably spending about $400 dollars on a camshaft, might as well spend $25 to get one that fits your puzzle.
You are probably spending about $400 dollars on a camshaft, might as well spend $25 to get one that fits your puzzle.
#29
I have no idea why people say they have driveability issues with the MS3.
I made 405 at the wheels cam only/ ls6 intake with my MS3, 6 speed.
Driveability is exactly the same as stock except the awesome idle.
ITS ALL IN THE TUNE ! ! ! !
It's a proven cam, I wouldn't ever waste time on a custom cam for these reasons:
-overrated
-Haven't been tested/ proven
-gain over off the shelf cams is minimal at best.
there are hundreds of cams out there for ls1's unless you are running a @#%% insane setup, why the hell would anyone waste their time going custom ?
Basically what I'm saying is "your needs" are probably the exact same as thousands of ls1 owners before you and there are cams out there for "those needs".
I made 405 at the wheels cam only/ ls6 intake with my MS3, 6 speed.
Driveability is exactly the same as stock except the awesome idle.
ITS ALL IN THE TUNE ! ! ! !
It's a proven cam, I wouldn't ever waste time on a custom cam for these reasons:
-overrated
-Haven't been tested/ proven
-gain over off the shelf cams is minimal at best.
there are hundreds of cams out there for ls1's unless you are running a @#%% insane setup, why the hell would anyone waste their time going custom ?
Basically what I'm saying is "your needs" are probably the exact same as thousands of ls1 owners before you and there are cams out there for "those needs".
#31
Also my ms3 car is 100% street driven has never/will never see the track.
and is NOT a dog down low, despite what so many users claim on these boards.
Just my .02/ real world big cam experience.
Also I'm a little confused with this "torque down low= fast street car" business.
I guess in theory more torque is going to make a faster low rpm car ...........................
BUT I've never personally raced in the low/mid rpm band. Usually I'm in the upper rpm range when racing, which is buh-bye to "low end torque"
Is there a new style of racing where you shift before 4k rpms, that I don't know about?
Didn't mean to offend anyone or any custom cam grinders,
But I could not have been any happier going with my MS3.
and is NOT a dog down low, despite what so many users claim on these boards.
Just my .02/ real world big cam experience.
Also I'm a little confused with this "torque down low= fast street car" business.
I guess in theory more torque is going to make a faster low rpm car ...........................
BUT I've never personally raced in the low/mid rpm band. Usually I'm in the upper rpm range when racing, which is buh-bye to "low end torque"
Is there a new style of racing where you shift before 4k rpms, that I don't know about?
Didn't mean to offend anyone or any custom cam grinders,
But I could not have been any happier going with my MS3.
#32
I could be wrong, but from what I've seen (and I'm talking about a cam only/intake engine) in most cases a custom grind won't net more than a popular off the shelf cam (picked for purpose-obviously).
The most it will do is bring the powerband/peak power to where you want it in the rpm range to suit your needs, but like I said typically there is already an off the shelf cam that would do the same.
--- of course, there are exceptions.
The most it will do is bring the powerband/peak power to where you want it in the rpm range to suit your needs, but like I said typically there is already an off the shelf cam that would do the same.
--- of course, there are exceptions.
#35
TECH Senior Member
iTrader: (18)
I could be wrong, but from what I've seen (and I'm talking about a cam only/intake engine) in most cases a custom grind won't net more than a popular off the shelf cam (picked for purpose-obviously).
The most it will do is bring the powerband/peak power to where you want it in the rpm range to suit your needs, but like I said typically there is already an off the shelf cam that would do the same. --- of course, there are exceptions.
The most it will do is bring the powerband/peak power to where you want it in the rpm range to suit your needs, but like I said typically there is already an off the shelf cam that would do the same. --- of course, there are exceptions.
You stick to your belief that custom grinds are a waste of time and overrated. You MS3 is no better then half the custom grinds out there. You also focus on peak numbers like that makes cars fast. People dont wanna have to rev there motors to 6800 to be in the powerband.
For a daily driver if you wanna merge into traffic for example, do you ALWAYS drop a geqar or two and rev the motor to 6800? No you leave it in the gear and rev it to 4k and throw it in 6th. With custom grind cams you can have the peak power you want, but you can spread the power across whatever range you want.
Off the shelf cams like the ms3 and trex etc are awesome cams that make great power, but for the same price, why not custom grind a cam that can give you the upper rpm power as well as some power down low that the MS3 may not offer?
#36
Isnt that kinda what you want? LMAO
You stick to your belief that custom grinds are a waste of time and overrated. You MS3 is no better then half the custom grinds out there. You also focus on peak numbers like that makes cars fast. People dont wanna have to rev there motors to 6800 to be in the powerband.
For a daily driver if you wanna merge into traffic for example, do you ALWAYS drop a geqar or two and rev the motor to 6800? No you leave it in the gear and rev it to 4k and throw it in 6th. With custom grind cams you can have the peak power you want, but you can spread the power across whatever range you want.
Off the shelf cams like the ms3 and trex etc are awesome cams that make great power, but for the same price, why not custom grind a cam that can give you the upper rpm power as well as some power down low that the MS3 may not offer?
You stick to your belief that custom grinds are a waste of time and overrated. You MS3 is no better then half the custom grinds out there. You also focus on peak numbers like that makes cars fast. People dont wanna have to rev there motors to 6800 to be in the powerband.
For a daily driver if you wanna merge into traffic for example, do you ALWAYS drop a geqar or two and rev the motor to 6800? No you leave it in the gear and rev it to 4k and throw it in 6th. With custom grind cams you can have the peak power you want, but you can spread the power across whatever range you want.
Off the shelf cams like the ms3 and trex etc are awesome cams that make great power, but for the same price, why not custom grind a cam that can give you the upper rpm power as well as some power down low that the MS3 may not offer?
Ya it could be useful in that situation to go custom I agree. But what I'm saying is there is most likely a off the shelf cam that would suit the OP's needs just fine, It doesn't sound like he's running a 900hp setup and needs a custom you know?
FWIW, my car is 100% street driven, and my ms3 is not a dog down low and merges into traffic fine
I also don't rev to 6800, the cam stops making power (with my setup) around 65-6600 according to my dynograph which was pulled to 6900.
#38