Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Help, Fuel in Oil!

Thread Tools
 
Search this Thread
 
Old 06-30-2010 | 01:27 PM
  #21  
Formula1996's Avatar
Thread Starter
On The Tree

iTrader: (7)
 
Joined: Apr 2006
Posts: 117
Likes: 1
From: SoCal
Default

Originally Posted by lemons12
I would try to not over examine too much man.. Do the simplest thing and get the codes ran. After that (which is likely the problem) get a tune, base or dyno whichever you think is best for your situation.
If that doesn't solve your problem, then go to the more advanced and rare things that could cause this problem.
Finally got the codes scanned... They were all the expected ones: No EGR, no rear O2's, no air pump. There were no unexpected codes in the ECU.

I'm prob goring to order EFI live in the next few weeks to tune it. Can't drive it right now due to shoulder surgery but hopefully I will have her up and running soon. I will report back with my findings from the tuning process.

Thanks again for the help guys!
Old 06-30-2010 | 02:25 PM
  #22  
1SLwLS1's Avatar
TECH Fanatic
iTrader: (6)
 
Joined: Feb 2009
Posts: 1,360
Likes: 0
Default

How'd you do your routing of the catch can(s)?
Old 06-30-2010 | 09:29 PM
  #23  
Formula1996's Avatar
Thread Starter
On The Tree

iTrader: (7)
 
Joined: Apr 2006
Posts: 117
Likes: 1
From: SoCal
Default

I used the picture from this link for a dual catch can with the ls1 valley cover plate (NA).

https://ls1tech.com/forums/11059703-post70.html
Old 06-30-2010 | 11:56 PM
  #24  
NoTractionLS1's Avatar
Banned
 
Joined: Jul 2008
Posts: 406
Likes: 1
From: Trollin DFW Texas
Default

Hahah!




All times are GMT -5. The time now is 07:07 PM.