Mmm Cam/lifter carnage omnomnomnom
#1
Staging Lane
Thread Starter
Join Date: Jun 2007
Location: Tallahassee, FL
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Custom Pat G. specced cam bought through Thunder Racing (NOT blaming them, just stating a fact) with approx 20k miles; car itself has 68k miles on the odo. Developed a tick a week or so ago and didn't think it was anything more than a collapsed lifter. Boy, was I wrong. Intake lobes on #1 & #5 and corresponding lifters. Who wants to guess what went wrong?
![](https://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs162.snc4/37440_10100258964934043_5258251_61482056_4574889_n.jpg)
![](https://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs130.snc4/36866_10100258965642623_5258251_61482138_3227241_n.jpg)
![](https://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs162.snc4/37440_10100258964934043_5258251_61482056_4574889_n.jpg)
![](https://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs130.snc4/36866_10100258965642623_5258251_61482138_3227241_n.jpg)
![](https://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs159.snc4/37282_10100258965787333_5258251_61482147_2521950_n.jpg)
Last edited by Super Slow Z; 06-26-2010 at 11:29 PM.
Trending Topics
#13
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Over the past couple of years,cam and lifter failures such as the OP's seem to be more and more frequent. I've seen it multiple times on LS vehicles with stock cams and lifters.
I'm starting to believe it might have something to do with the lack of additives that were present in years past in today's oils.
Rotella is the only oil I'm aware of that still incorporates Zinc and Phosphorus as additives.
I'm starting to believe it might have something to do with the lack of additives that were present in years past in today's oils.
Rotella is the only oil I'm aware of that still incorporates Zinc and Phosphorus as additives.
#14
Staging Lane
Thread Starter
Join Date: Jun 2007
Location: Tallahassee, FL
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Also I pulled the stock cam at around 45-50k and there isn't any damage on it what so ever. The car only has 68k on the clock.
#15
TECH Fanatic
iTrader: (3)
Join Date: Jan 2008
Location: Corpus Christi Texas
Posts: 1,519
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Over the past couple of years,cam and lifter failures such as the OP's seem to be more and more frequent. I've seen it multiple times on LS vehicles with stock cams and lifters.
I'm starting to believe it might have something to do with the lack of additives that were present in years past in today's oils.
Rotella is the only oil I'm aware of that still incorporates Zinc and Phosphorus as additives.
I'm starting to believe it might have something to do with the lack of additives that were present in years past in today's oils.
Rotella is the only oil I'm aware of that still incorporates Zinc and Phosphorus as additives.
I run ford Diesel motor oil as it has the most additives still incorporated
#17
TECH Apprentice
iTrader: (2)
Join Date: May 2007
Location: Buffalo, NY
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
maybe ...
springs went bad causing the lifter bounce on the cam messing up the finish and the lifter at the same time.
lifter itself just took a **** causing the above type action.
as previously mentioned, oils may have had a hand in this.
all of the above.
#19
Staging Lane
Thread Starter
Join Date: Jun 2007
Location: Tallahassee, FL
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)