Tsunami or MS3
#1
Staging Lane
Thread Starter
iTrader: (19)
Join Date: Dec 2009
Location: Lancaster, PA
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Tsunami or MS3
Have a 2000 SS which will be getting heads/cam this winter, my question is which cam to go with, I am planning on buying the head/cam package from texas speed, the prc stage 2.5 5.3l heads. I have heard many good things about this stuff and this is going to be a budget build. Their combinations are budget friendly and have proven power. Do i go with the tsunami cam or the ms3. the car currently has the following mods:
Lt's, ory, cutout, gmmg
slp lid, p/p tb, ls6 intake
spec 3+
10 bolt, 410 gears with trickflow cover
plugs,wires, etc.
and all the other small stuff.
its time to get internal now, I am looking for 425-450 rwhp, will eventually upgrade to a fast intake/tb, but for now the ls6 is gonna do.
It is a street car that sees the track once or twice a year, just want more power.
What combo do I go with or any recommendations on another budget setup, thanks guys
Lt's, ory, cutout, gmmg
slp lid, p/p tb, ls6 intake
spec 3+
10 bolt, 410 gears with trickflow cover
plugs,wires, etc.
and all the other small stuff.
its time to get internal now, I am looking for 425-450 rwhp, will eventually upgrade to a fast intake/tb, but for now the ls6 is gonna do.
It is a street car that sees the track once or twice a year, just want more power.
What combo do I go with or any recommendations on another budget setup, thanks guys
#5
Staging Lane
Thread Starter
iTrader: (19)
Join Date: Dec 2009
Location: Lancaster, PA
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
i'm leaning more towards the ms3, never heard anything bad about it and good power increases, and yeah the 10 bolt wont be seeing the track at all after the cam setup, wont last long with dr's
#6
TECH Enthusiast
iTrader: (4)
Join Date: Aug 2009
Location: longview, wa
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
Have a 2000 SS which will be getting heads/cam this winter, my question is which cam to go with, I am planning on buying the head/cam package from texas speed, the prc stage 2.5 5.3l heads. I have heard many good things about this stuff and this is going to be a budget build. Their combinations are budget friendly and have proven power. Do i go with the tsunami cam or the ms3. the car currently has the following mods:
Lt's, ory, cutout, gmmg
slp lid, p/p tb, ls6 intake
spec 3+
10 bolt, 410 gears with trickflow cover
plugs,wires, etc.
and all the other small stuff.
its time to get internal now, I am looking for 425-450 rwhp, will eventually upgrade to a fast intake/tb, but for now the ls6 is gonna do.
It is a street car that sees the track once or twice a year, just want more power.
What combo do I go with or any recommendations on another budget setup, thanks guys
Lt's, ory, cutout, gmmg
slp lid, p/p tb, ls6 intake
spec 3+
10 bolt, 410 gears with trickflow cover
plugs,wires, etc.
and all the other small stuff.
its time to get internal now, I am looking for 425-450 rwhp, will eventually upgrade to a fast intake/tb, but for now the ls6 is gonna do.
It is a street car that sees the track once or twice a year, just want more power.
What combo do I go with or any recommendations on another budget setup, thanks guys
Trending Topics
#17
Staging Lane
iTrader: (1)
Join Date: Mar 2010
Location: Pinebluff NC
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
i was in the same boat as you op. have same setup w an m6, and 373 gears in my 10 also. id have to say ive heard the same set up with the m3 and the tsunami and id have to go hands down tsunami. reminds me of an old school beefed up muscle car. tsp suggested the tsunami with the same prc heads. said for this setup it would make the best power. My dyno was 440hp and 418tq tune by rpm in garner nc.
#18
Staging Lane
Thread Starter
iTrader: (19)
Join Date: Dec 2009
Location: Lancaster, PA
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
what intake setup were you running, i currently have the ls6 with p/p tb. eventually will go fast if i can get a good 90 setup used. I also picked up a set of 38# injectors when everything goes in
#19
On The Tree
iTrader: (5)
Join Date: Jan 2010
Location: Palm Beach County, FL
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Check this thread out. It shows some pretty impressive results from the Tsunami cam.
https://ls1tech.com/forums/dynamomet...o-results.html
https://ls1tech.com/forums/dynamomet...o-results.html
#20
Captain Double Post
iTrader: (2)
I was gonna get the ms3,but I went with the ms4,if you were in a m6 I would say maybe get the ms4,but I think you'll be happy with the ms3,sounds good,good gains.are there any dyno charts that compare the ms3 and ms4? I would like to see how they match up,I know I wouldn't trade out the ms4 for anything,can't wait to spray it next year