Who could grind this cam?
Thread Starter
Joined: Mar 2010
Posts: 732
Likes: 13
From: Murfreesboro, TN
Who could grind this cam? i had a cam recommended to me, but when i checked on some of the more popular websites, i couldn't find these exact specs in the custom grind categories.....the specs are:
227/231 .614/.617 110+3
who could cut this for me?.....what lobes?....are all custom cam grinders pretty much the same?....
the closest off the shelf cam i could find is from comp cams:
part #54-458-11
227/235 .614/.621 113+4
would i have to flycut for stock 806 heads?
227/231 .614/.617 110+3
who could cut this for me?.....what lobes?....are all custom cam grinders pretty much the same?....
the closest off the shelf cam i could find is from comp cams:
part #54-458-11
227/235 .614/.621 113+4
would i have to flycut for stock 806 heads?
Thread Starter
Joined: Mar 2010
Posts: 732
Likes: 13
From: Murfreesboro, TN
Check out this thread, some guy is getting the same thing almost.
https://ls1tech.com/forums/generatio...1-113-lsa.html
https://ls1tech.com/forums/generatio...1-113-lsa.html
TECH Fanatic
Joined: Feb 2004
Posts: 1,259
Likes: 0
From: Lexington, KY
There aren't many places that actually grind cams. The vendors selling them are selling cams ground by comp, cam motion, or maybe just a few other places that actually manufacture cams. They don't actually grind them in house. So don't be misled.
You will need more than a basic mail order tune to get the most out of it.
You will need more than a basic mail order tune to get the most out of it.
Thread Starter
Joined: Mar 2010
Posts: 732
Likes: 13
From: Murfreesboro, TN
^^i don't know why i thought that.....but it's cool since HKracing has this one......Mr Jerry Onks apparently has a shop about 15 miles from where i live.....when i put all of this together, i will try to get him to dyno it for me......thanks for the help
I got my cam reground by these guys, http://deltacam.com/index.php It was $115.00 including shipping. Got it back in two weeks. Engine is not together yet, so we will see how it goes.
Trending Topics
TECH Senior Member
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
TSP can do it, as well as TR and many other vendors on your right.
It is a LSL lobed Comp Cam.
This is the info you need to give the shop:
Intake lobe #13017R
Exhaust lobe # 13018R
110 LSA (Lobe separation angle)
107 ICL (Intake centerline)
It is a LSL lobed Comp Cam.
This is the info you need to give the shop:
Intake lobe #13017R
Exhaust lobe # 13018R
110 LSA (Lobe separation angle)
107 ICL (Intake centerline)
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
