lq4 swap no spark
#1
lq4 swap no spark
I just did an lq4 swap into my trans am and took out the ls1. I swaped over all accesories and all sensors. I'm also using the ls1 harness and ecm. When I went to start it there was no spark to any cylender. All it will do is just turn over. Does anyone have any idea what's going on? All the sensors that I swaped over from my ls1 to the 6.0 were all good. Thanks
#5
The motor turns over but it won't start. There is no spark coming out of the coil packs, but I put got more coil pacs to see if it was thos and they new ones had no spark either... any help would be greatly appritiated
Trending Topics
#9
12 Second Club
iTrader: (3)
Very possible the crank sensor or cam sensor isnt reading.if you have access to a obd2 code reader then plug it in and crank the car for a few seconds and it may give a code as to the problem.Id double check the crank sensor first...I had mine not plugged in all the way and did this exact issue.Good luck
#10
TECH Apprentice
iTrader: (12)
Join Date: Oct 2011
Location: Denton Md
Posts: 381
Likes: 0
Received 0 Likes
on
0 Posts
Very possible the crank sensor or cam sensor isnt reading.if you have access to a obd2 code reader then plug it in and crank the car for a few seconds and it may give a code as to the problem.Id double check the crank sensor first...I had mine not plugged in all the way and did this exact issue.Good luck
#11
12 Second Club
iTrader: (3)
Sadly you may have to do a case learn procedure and that means towin the car to a nearby dealership or dyno shop.You need someone with hptuners or a tech2 to initiate the crank sensor learn.Right now the crank sensor is not correctly reading the reluctor and wont give spark to the plugs.I dont know of anyway to cheat a case learn code but search tech and maybe there is something that can be done.
#13
TECH Apprentice
iTrader: (12)
Join Date: Oct 2011
Location: Denton Md
Posts: 381
Likes: 0
Received 0 Likes
on
0 Posts
Talked to my harness guy i was losing power on my ignition relay while cranking soon as i added power to it fired rate up. He also said it should of ran with the crank learn code.