What method do you use when pullin a LS Engine ?
#1
What method do you use when pullin a LS Engine ?
I saw a fixture that my tuner had welded up that he bolted to the knock sensor holes which obviously meant he would take the intake off before pulling the motor.
The Haynes manual shows them using just a chain front to back from one side to the other with the manifold still on.
Anyway what tricks have you guys learned from experience? Do you pull the alternator and air conditioning compressor and all the accessories off before pulling the motor?
What have YOU found to work best?
The Haynes manual shows them using just a chain front to back from one side to the other with the manifold still on.
Anyway what tricks have you guys learned from experience? Do you pull the alternator and air conditioning compressor and all the accessories off before pulling the motor?
What have YOU found to work best?
#3
11 Second Club
iTrader: (10)
Join Date: Feb 2006
Location: Sterling Heights, MI
Posts: 2,215
Likes: 0
Received 2 Likes
on
2 Posts
i pulled mine from the top. I pulled the intake, heads and front accessories minus the crank pulley. I already had my a/c out. Radiator needs to come out and i took the bumper off just in case for some extra room
#4
TECH Enthusiast
Join Date: Jun 2010
Location: Illinois
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
through the bottom is actually extremely easy. there are a lot of online forums that go step by step. the hardest part is just getting the car high enough...but as along as you follow it step by step the entire k member rolls out on the tires....i did mine in my driveway in the middle of a snow storm and it only took 5-7 hours to get it out (a lot of going back in the garage to warm up etc......beers...lol)...once you do it, it gets easier...on a clear day, my dad and i could probably get the entire carriage pulled out in 2 hours...if that working straight at it.
im trying to find the book we followed step by step but most auto stores sell manuals or like i said...there r a lot of online forums...
im trying to find the book we followed step by step but most auto stores sell manuals or like i said...there r a lot of online forums...
Last edited by RoidedSS; 01-13-2011 at 01:33 AM.
#6
LS1Tech Premium Sponsor
iTrader: (5)
From the top!!
__________________
Largest Stocking Distributor of LS-x Engines / CHECK OUT OUR NEW WEBSITE!
COMP - FAST - PACESETTER - DIAMOND RACING - EAGLE SPECIALTY PRODUCTS - CALLIES - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - KOOK'S HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - AND MORE!
Largest Stocking Distributor of LS-x Engines / CHECK OUT OUR NEW WEBSITE!
COMP - FAST - PACESETTER - DIAMOND RACING - EAGLE SPECIALTY PRODUCTS - CALLIES - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - KOOK'S HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - AND MORE!
Trending Topics
#10
Teching In
iTrader: (3)
Join Date: Jan 2010
Location: Jacksonville, AL
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Are you pulling both the engine and trans or just the motor? Can you post the name of the manuals or a link to the forums that helped you as this is my first time pulling an engine. Lol.
#11
If you pull the intake and heads its so dam easy pulling the engine out the top I CAN"T IMAGINE why anyone would pull it out the bottom. The only problem I see is the auto trans welding itself to the steel alignment pins can be a BEAR to get apart so you may end up pulling the auto trans with it out the top.
#13
Either take the transmission with it, or pull transmission later and reinstall the transmission after the engine is back in and secured. It was a PITA to line up the transmission input and dowels using nothing but the hoist, a jack, some pry-bars and a whole lot of cursing.
#14
11 Second Club
iTrader: (27)
Join Date: May 2005
Location: Your girl's back door giving her the long stroke while you're at work
Posts: 6,801
Likes: 0
Received 3 Likes
on
3 Posts
I've always pulled mine from the top, the first time was with the six speed still attached. Second and third time I unbolted the TH350 and took it out first then pulled the motor
#15
TECH Fanatic
iTrader: (10)
I'm doing the clutch while the motor is out anyways...so should I pull/install the engine and trans as one unit? Or separately? I have a leveler for my hoist, so angling is no problem if I can put it back in as one unit...seems like it would be easier to install the new clutch and all with the engine/trans out of the car.
#18
TECH Fanatic
iTrader: (10)
Sorry man, maybe I wasn't clear. My stock LS1 has toasted ringlands, so I picked up an LQ4 shortblock and have put together a build with the mods in my sig. I'm swapping the motor soon, and I justed picked up a Monster Level 3 clutch, so I wanted to do it all at once. That's why I was asking...