Gains from TR230
#1
TECH Apprentice
Thread Starter
iTrader: (43)
Join Date: Oct 2007
Location: Wisconsin
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Gains from TR230
Ok, so I have some pretty big plans for my car come spring. My car is basically stock except for an slp air lid.
What kind of HP increase will I see on my 2000z with a TR230/224 .575 .563 111 lsa, 1 3/4 longtubes, custom Y with flowmaster merge, SLP LM 2 exhaust, ported throttle body and street tune. Is 375 rear wheel about right? Just trying to get a ballpark of what I should expect.
What kind of HP increase will I see on my 2000z with a TR230/224 .575 .563 111 lsa, 1 3/4 longtubes, custom Y with flowmaster merge, SLP LM 2 exhaust, ported throttle body and street tune. Is 375 rear wheel about right? Just trying to get a ballpark of what I should expect.
#5
TECH Apprentice
Thread Starter
iTrader: (43)
Join Date: Oct 2007
Location: Wisconsin
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Whoops, knew I was forgetting something..It's an M6, stock 3.42 gears
Well, I was shooting for 400 but,
I arrived at a reverse split cam because I'm not planning on getting an ls6 intake right away and I'm sticking to my stock heads. I was reading that with a good flowing exhaust with this cam, I'll make pretty good power so I thought why not. Found a decent deal on the cam so I pulled the trigger.
I arrived at a reverse split cam because I'm not planning on getting an ls6 intake right away and I'm sticking to my stock heads. I was reading that with a good flowing exhaust with this cam, I'll make pretty good power so I thought why not. Found a decent deal on the cam so I pulled the trigger.
Last edited by PACKERSz28Camaro; 01-17-2011 at 12:55 AM.
Trending Topics
#11
TECH Apprentice
Thread Starter
iTrader: (43)
Join Date: Oct 2007
Location: Wisconsin
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
#15
TECH Senior Member
iTrader: (5)
i run a cam pretty much similar to the TR230. I have the X1 230/227 591/571 112 on a auto stock heads. I gained 70 rwhp with that cam and tuned. With bolt ons i made 322/333. With just that cam, stall, and a tune i made 395rwhp.
I love how civil my cam is. I can start it up anytime, not worrying about bucking, surging or being a pain to drive. I will be adding heads, and a ported fast intake to see how much HP i can make with this cam.
I love how civil my cam is. I can start it up anytime, not worrying about bucking, surging or being a pain to drive. I will be adding heads, and a ported fast intake to see how much HP i can make with this cam.
#16
11 Second Club
iTrader: (18)
I have something similar but on comp xe lobes. Great low end torque, drives like their is no cam but pulls hard, especially above 3500-4k. I shift at 6300rpm. Lopes pretty damn well too so it gives that cool "big cam" sound a lot of people like without the negatives of having a donkey dick cam.
My dyno numbers looked like crap (final numbers were 350rwhp/325rwtq, but it did show 370rwhp/345tq on the same dyno in drier weather...both times were SAE corrected) converter unlocked and exhaust capped, but at the track I'm trapping like a 375-380rwhp car for my weight.
It LOVES good exhaust...I pick up an average of .15 and 2mph with my cutouts open...and I have true duals 3" to muffler and 2.25" over the axle from the mufflers. Cutouts are 8-12" behind the collectors.
The Thunder Racing lobes should be a little more aggressive in mid lift so it should make more power than mine. One of the tech gurus on here said it could be as much as a 10hp difference.
Overall I guess I'm pleased but given the choice to do over I would get something newer, slightly larger, and standard split or if I wanted to keep it reverse something like the "El Torro" cam (search). I didn't count on getting a Fast intake for the price I did so it makes a lot less sense now.
My dyno numbers looked like crap (final numbers were 350rwhp/325rwtq, but it did show 370rwhp/345tq on the same dyno in drier weather...both times were SAE corrected) converter unlocked and exhaust capped, but at the track I'm trapping like a 375-380rwhp car for my weight.
It LOVES good exhaust...I pick up an average of .15 and 2mph with my cutouts open...and I have true duals 3" to muffler and 2.25" over the axle from the mufflers. Cutouts are 8-12" behind the collectors.
The Thunder Racing lobes should be a little more aggressive in mid lift so it should make more power than mine. One of the tech gurus on here said it could be as much as a 10hp difference.
Overall I guess I'm pleased but given the choice to do over I would get something newer, slightly larger, and standard split or if I wanted to keep it reverse something like the "El Torro" cam (search). I didn't count on getting a Fast intake for the price I did so it makes a lot less sense now.