nitr0racing21

iTrader: (5)

Who know the cam specs to the X4?

NBM-LS1

iTrader: (7)

Those who know dont tell....

Minshall

It's kinda like that tootsie roll pop commercial. The world may never know! Its the cam that I'm running right now. If you search hard enough you'll be able to find a bit of info on the specs.

mike c.

iTrader: (1)

I can't remember. But,on the dyno it only netted me 5hp over the x3 cam and didn't drive as well. LG Will tell you if you call them,louis always told me when i asked.

2000TransAmWS6

iTrader: (12)

i've got the X3 and they didn't tell me squat about the cam. they wouldn't even tell me what to degree the cam to, they just said "straight up".

next time i get a chance i'm going to do my own "cam doctor" on it and find out exactly what the specs are.

mike c.

iTrader: (1)

Degree??? I have had seven different cams and never degreed anything. Dot to dot. the x4 is close to a 240/248, again it's ben some time ago. louis always told me when i asked. Call and see if he will let you know.

2000TransAmWS6

iTrader: (12)

there are plenty of write-ups in this forum about the benefits of having your cam degreed in. i've got a wheel and know how to do it, so i figure i might as well do it.
i might give him a call when i get around to messing with it again.

big reg

iTrader: (28)

G5x3 specs are 234/242 on xe-r lobes. LG cams are usually 2 degrees larger than the one below it. The x2 specs are 232/240.

chriswtx

iTrader: (5)

G2
224
224
.580
.580
114

G5
224
230
.581
.572
114

G5X1
228
232
.588
.574
112/114

G5X2
232
240
.595
.608
112/114

G5X3
234
242
.600
.610
112/114


don't have the G5X4 cam #s..