Information regarding the Thunder Racing T-ReX camshaft
03-09-2004, 01:04 PM
#121
10 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Cali/Bay Area
Posts: 3,412
Likes: 0
Received 0 Likes
on
0 Posts
Interesting about the rhoads lifters. They have been around forever, and they actually have a part number for the LS1 (RL-1728). The lifter bleeds off faster at low rpm, thus making your lift smaller by about .020", increasing your vacuum and torque. By 3500 RPM, your back at full lift again, basically the lifter goes solid at high RPM. They have been tested up to 9000 RPM, with heavy springs and no valve float...Cool!
Dan
Dan
03-09-2004, 03:13 PM
#122
Launching!
Join Date: Nov 2003
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
can you use stock lifters
Originally Posted by Till
I wonder if you could use Rhoadslifters with this cam. They sound like a great idea, but I couldn't find any reference to someone actually using them on a LS1.
Till
Till
01-16-2009, 05:14 PM
#123
Teching In
Join Date: Nov 2008
Location: lithia springs, ga
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
i'm in the process of building my ls1 right now, i did a pocket port on the heads and got 15 cfm on the intake and 16 on the exhaust, i want to use the trex cam in my ls but i also wanna run a turbo on it too. i've been told that the trex is not a good cam to us for a turboed ls1 so does anyone got any suggestions?
04-06-2020, 09:35 PM
#124
2020 Feeling nostalgic.
dam I remember when this was a new thread.
I still own a thunder racing Trex. A genuine Louisiana Trex. Not a copy.
Goin in my current build. 16 years later. Still one of the best cams of all time.
The original 3/4 race cam for the LS1😁
dam I remember when this was a new thread.
I still own a thunder racing Trex. A genuine Louisiana Trex. Not a copy.
Goin in my current build. 16 years later. Still one of the best cams of all time.
The original 3/4 race cam for the LS1😁
The following users liked this post:
GrannySShifting (04-08-2020)
04-07-2020, 07:10 AM
#125
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,838 Likes
on
1,146 Posts
Originally Posted by NemeSS
Feeling nostalgic.
dam I remember when this was a new thread.
I still own a thunder racing Trex. A genuine Louisiana Trex. Not a copy.
Goin in my current build. 16 years later. Still one of the best cams of all time.
The original 3/4 race cam for the LS1😁
dam I remember when this was a new thread.
I still own a thunder racing Trex. A genuine Louisiana Trex. Not a copy.
Goin in my current build. 16 years later. Still one of the best cams of all time.
The original 3/4 race cam for the LS1😁
The following users liked this post:
Ls7colorado (04-07-2020)
