HELP!! Not building oil pressure TWICE in my LS6!
#21
TECH Enthusiast
Thread Starter
iTrader: (6)
Join Date: Aug 2008
Location: Alvin, TX/HOUSTON,TX
Posts: 592
Likes: 0
Received 0 Likes
on
0 Posts
Pulled the pan off and what do u know it was the o ring in the pick up tube wich was pinched . So going to put a new one in . Fresh mobile 1 and filter and see how this goes...
#23
So you'll also want to hold the pickup tube up against the pump housing while tightening the bolt, not using the bolt to pull the tube into place.
So good luck!