spiro27

im doing same setup as we speak as well same cam from eps. ls7 lifter and ls2 trays. tfs 215 heads puuting on out of the box 1.7 yella terra rockers. arh 1/78 headders with 3 inc collector and y pipe with cats. i cant wait. what do you think you will make hp tq wise. i was told 440 at wheel by eps. with fast 102 470rwhp. still deciding on fast 102 and tb. what injectors are you going to run. good luck

jlrz28

iTrader: (7)

Sounds close to mine. I am doing the 102/102, and using the 36lb Fast injectors.

chrs1313

iTrader: (24)

turned down ls3 valves for the win...

jlrz28

iTrader: (7)

Chris after seeing your car in the magazine, I made up my mind!

98blueSScamaro

iTrader: (14)

stop making me but hurt over heads my stock LS 243's are not cutting it

chrs1313

iTrader: (24)

you can always get a 2.04 valve job

but I think a set of afr's or tfs will be a nice ticket too

you car rips man but the modding never stops...

someone say 200 shot

jlrz28

iTrader: (7)

Just got word the car made 444hp and 401tq through full exhaust.

98blueSScamaro

iTrader: (14)

awesome numbers

fatmat80

^You can say that again..

I just want to say thank you to people like Cris1313,98bluesscamaro, mamo, vengence racing, Texas Speed, Bob from Brute Speed, Trust and others for their contributions to this site. I have learned a lot from this site because of people like you guys!!!

Sorry if I left off anyones name..

Bob@BruteSpeed

iTrader: (16)

Thanks, I appreciate it! Bob

supergt99

iTrader: (1)

good to hear this, i ordered a set of tfs 215 with ls3 valves. will be topping it off with a ported fast102.

fatmat80

supergt99 who is porting your fast?

jlrz28

iTrader: (7)

Graph...

https://ls1tech.com/forums/dynamomet...102-nw102.html

98blueSScamaro

iTrader: (14)

this is what tech is about and thanks should have a built thread out soon on a nother setup we did here soon.

Rob

jlrz28

iTrader: (7)

Well it sounds like the new lifters that I bought are bad. Possibly sticking or bleeding down.

spiro27

are they noisey i hear that it is normal for motors with eps cam to sound like a sewing macine. did you end up degreeing the cam or was it fine dot to dot.

Sales1@Texas-speed

Thanks for kind words. We appreciate it!

jlrz28

iTrader: (7)

Well got the lifters fixed and opened the cutout 462hp(corrected)...post graph later

PONTIAC SLP

iTrader: (3)

Great results with 60cc and small cam , I did the same setup for one of my customers for his LS1 but with milled to 59cc and MS4 112 made 470rwhp through 3.2 gears , I know those heads tested on 1-7/8 CFM @600lift but hes running hokker 3/4 headers , It will peak more with 1-7/8 headers , i replaced his cam to custom grind 246/252 110 LSA and run 3.7 with colder NGK TR7 plugs and low timing for nitrous tune he pulled 450RWHP and 250HP he made 700RWHP / 695RWTQ .