228r cam/Head Combo questions
#21
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Sep 2009
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
I don't wanna stay with the 241 heads. I think it'd be a waste of money to get them ported and done up. My plan was to get the 243/799 heads and get a valve job and some port work done. I can't go crazy because I don't have a ton of money but I am fairly certain that if I get some mild port work and a valve job I would exceed the performance of a set of fully ported 241s. And it would make it a whole lot easier to do a head and cam swap all at once rather than pull off my 241s and send them out. Just my .02
#22
I don't wanna stay with the 241 heads. I think it'd be a waste of money to get them ported and done up. My plan was to get the 243/799 heads and get a valve job and some port work done. I can't go crazy because I don't have a ton of money but I am fairly certain that if I get some mild port work and a valve job I would exceed the performance of a set of fully ported 241s. And it would make it a whole lot easier to do a head and cam swap all at once rather than pull off my 241s and send them out. Just my .02
#24
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Sep 2009
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
I don't wanna stay with the 241 heads. I think it'd be a waste of money to get them ported and done up. My plan was to get the 243/799 heads and get a valve job and some port work done. I can't go crazy because I don't have a ton of money but I am fairly certain that if I get some mild port work and a valve job I would exceed the performance of a set of fully ported 241s. And it would make it a whole lot easier to do a head and cam swap all at once rather than pull off my 241s and send them out. Just my .02
#26
I don't wanna stay with the 241 heads. I think it'd be a waste of money to get them ported and done up. My plan was to get the 243/799 heads and get a valve job and some port work done. I can't go crazy because I don't have a ton of money but I am fairly certain that if I get some mild port work and a valve job I would exceed the performance of a set of fully ported 241s. And it would make it a whole lot easier to do a head and cam swap all at once rather than pull off my 241s and send them out. Just my .02
I'd get the 241's done up, but that's just my opinion. Advanced Inductions ftw. Heads are not the area you go cheap!
#27
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Sep 2009
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
I can get a good deal on the heads and I'm not getting them all out full ported but even a little bit of porting and a valve job would still be a few hundred under the $1000 plus that it'd take to do the 241's. And like I said I wanna do this all relatively quick, so I won't have time to pull off the 241s and send them out for a couple weeks and its certainly not worth buying another set to me..
#29
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Sep 2009
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
How streetable is the Torquer V3? Is there any kind of significant power gain over the 233/239 cam? Im dead set on the 243/799 heads. i already have a set of 317's but im trying to sell or trade for some 243s or 799s
#31
TECH Regular
Join Date: Aug 2010
Location: houston, texas
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
just saw your question. yes both cars have stock 241 heads. my 98 made 426 with an MS4 and stock 853's. cody doesnt daily his car with the V.3 but he could no prob (six speed). he loves his. so does steven with tsunami. he pretty much drives his everyday (stalled auto).