Power making a4 cam still streetable
#1
Launching!
Thread Starter
Power making a4 cam still streetable
Car will not be driven every day but would like to be able to still have the drive ability. Stock ls1 motor with about 50k on it, a set of 5.3 heads smoothed out and supporting bolt ons. This will be in my z28, car has a built 4l60e and a 3600 stall converter. Looking for a cam that will make good power and like a jug of juice every now and again. Please send me to the right direction! Thanks
#4
TECH Senior Member
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,240
Likes: 0
Received 81 Likes
on
72 Posts
Cam Motion 228/232 612/612 grind would work well...
And I might add most if not all vendors here make something very similar to that and there is a reason for that, it works well in a lot of applications.
If wanting to go custom I'd recommend Shane at Thunder Racing or Allan at Futral MS.
And I might add most if not all vendors here make something very similar to that and there is a reason for that, it works well in a lot of applications.
If wanting to go custom I'd recommend Shane at Thunder Racing or Allan at Futral MS.
Trending Topics
#10
TECH Junkie
iTrader: (2)
Join Date: Jan 2006
Location: Fort Wayne, IN
Posts: 3,776
Likes: 0
Received 0 Likes
on
0 Posts
Car will not be driven every day but would like to be able to still have the drive ability. Stock ls1 motor with about 50k on it, a set of 5.3 heads smoothed out and supporting bolt ons. This will be in my z28, car has a built 4l60e and a 3600 stall converter. Looking for a cam that will make good power and like a jug of juice every now and again. Please send me to the right direction! Thanks