which set up??

Reply Subscribe

Thread Tools

Search this Thread

Feb 21, 2012 | 08:21 PM

custombluebird

Thread Starter

Staging Lane

Joined: Jan 2012

Posts: 89

Likes: 0

From: manchester nh

which set up??

im goin to be running a yank ss3200 stall tsp or pacesetters long tubes, 3.73, asp crank pulley and ls6 intake and im goin to be hand porting a set of 243 heads and i have three cams in mind but not sure will have be best or others

1) tsp224r
2) tsp228r
3) torquer v2

im trying to get into the 11s or have an amazing power curve like 400wrhp
please give me your input

Feb 21, 2012 | 08:28 PM

njmaster

11 Second Club

iTrader: (5)

Joined: Oct 2011

Posts: 180

Likes: 0

From: Raleigh, NC

A 3200 stall would be big enough for the 228r but, imo a 3600 would be ideal for the torquer v2. With all the supporting mods and heads i'm sure the v2 would get you 400rwhp. I would go with the 228r with the setup you have listed.

Feb 21, 2012 | 08:38 PM

custombluebird

Thread Starter

Staging Lane

Joined: Jan 2012

Posts: 89

Likes: 0

From: manchester nh

sweet thank you and how do u think the driveabilty with either of those set ups??

Feb 21, 2012 | 08:44 PM

njmaster

11 Second Club

iTrader: (5)

Joined: Oct 2011

Posts: 180

Likes: 0

From: Raleigh, NC

The 3200 stall coupled with the 228r should have great driveability. The 3.73 gear you are running will also help make that setup feel stockish. You will know you have the stall though when you put it to the floor.

Feb 21, 2012 | 08:49 PM

custombluebird

Thread Starter

Staging Lane

Joined: Jan 2012

Posts: 89

Likes: 0

From: manchester nh

ok thats exactly what i was looking for also should i buy the cam kit that comes with new springs rods and timeing chain and also rocker arms??

Feb 21, 2012 | 08:53 PM

njmaster

11 Second Club

iTrader: (5)

Joined: Oct 2011

Posts: 180

Likes: 0

From: Raleigh, NC

You definitely want to get new springs,rods and timing chain. I'm pretty sure you can run your stock rockers but, why not upgrade them. I would do it.