Mti Stage 2e
TECH Fanatic
Joined: Feb 2002
Posts: 1,329
Likes: 0
From: Middleburg, FL
Originally Posted by Humanoid
I just dynoed 426hp with them and X1 with all boltons through cats. 400 unlocked.
yank ss4000, and on 11x17's
yank ss4000, and on 11x17's
) Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo New times in Sig 
Read about it here:
https://ls1tech.com/forums/drag-racing-tech/154728-new-best.html
Read about it here:
https://ls1tech.com/forums/drag-racing-tech/154728-new-best.html
Why doesn't MTI use the larger valves that are in most other stage 2 heads. MTI uses 2.02/1.55 on the 2e....most are going with 2.02/2.04 and 1.57/1.575.
Now they do use the larger valves on the more expensive heads (2R's), but in the same price range of 2e's everyone else still uses the bigger ones!
Now they do use the larger valves on the more expensive heads (2R's), but in the same price range of 2e's everyone else still uses the bigger ones!
