whats needed for comp trunion upgrade
Trending Topics
#11
The kit now comes with large washers to press the bearings in. No need for sockets etc. just a vice or a large c clamp
It also comes with new bolts. Buy the kit from Colorado speed. They are top notch
It also comes with new bolts. Buy the kit from Colorado speed. They are top notch
#14
TECH Senior Member
iTrader: (35)
I'm do the same thing, only I'm permanently removing my YT rockers before my lucks runs out and I do serious engine damage.
BTW, It gave me an excuse to buy a small (1ton) arbor press($65) from NorthernTools, I also have a set of LPE metal cnc machined rocker stand on order.
BTW, It gave me an excuse to buy a small (1ton) arbor press($65) from NorthernTools, I also have a set of LPE metal cnc machined rocker stand on order.
#15
I'm do the same thing, only I'm permanently removing my YT rockers before my lucks runs out and I do serious engine damage.
BTW, It gave me an excuse to buy a small (1ton) arbor press($65) from NorthernTools, I also have a set of LPE metal cnc machined rocker stand on order.
BTW, It gave me an excuse to buy a small (1ton) arbor press($65) from NorthernTools, I also have a set of LPE metal cnc machined rocker stand on order.
#20
That's a good video...but Comp makes me wonder why the letters need to face outwards. My assumption is the bearing are slightly tapered. From this I gather its a BAD idea to press it completely through the rocker arm if you mess up. The video did show much more force was required to push it all the way through vs just install. BLUF...Make sure you don't mess up.