View Poll Results: which cam is best
Voters: 37. You may not vote on this poll
torquer 2 vs torquer 3
I'm making pretty good numbers with the V3. But I'd probably go with the Tsunami or something around those specs if I did it again. I shift at 6,500 rpm and it doesn't dip down at all.
If your concerned with surging make sure it gets street tuned. You'll probably have to pull timing around 1,500 rpm to get rid of it.
If your concerned with surging make sure it gets street tuned. You'll probably have to pull timing around 1,500 rpm to get rid of it.
I'm making pretty good numbers with the V3. But I'd probably go with the Tsunami or something around those specs if I did it again. I shift at 6,500 rpm and it doesn't dip down at all.
If your concerned with surging make sure it gets street tuned. You'll probably have to pull timing around 1,500 rpm to get rid of it.
If your concerned with surging make sure it gets street tuned. You'll probably have to pull timing around 1,500 rpm to get rid of it.
i bought a tq3 112lsa for mine. not installed yet. doin clutch and rear end upgrades first. then adding fast 102 setup, ls6 cnc 2.5 tsp heads, around 12:1 compression and a good tune. i have a m6 btw. it should be fun and have a bottle on it as well for a lil extra.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
i bought a tq3 112lsa for mine. not installed yet. doin clutch and rear end upgrades first. then adding fast 102 setup, ls6 cnc 2.5 tsp heads, around 12:1 compression and a good tune. i have a m6 btw. it should be fun and have a bottle on it as well for a lil extra.
I'm making pretty good numbers with the V3. But I'd probably go with the Tsunami or something around those specs if I did it again. I shift at 6,500 rpm and it doesn't dip down at all.
If your concerned with surging make sure it gets street tuned. You'll probably have to pull timing around 1,500 rpm to get rid of it.
If your concerned with surging make sure it gets street tuned. You'll probably have to pull timing around 1,500 rpm to get rid of it.
I would get them to do a custom grind before I would do a v3. I do not like the idea of that kind of lift on a street car even if the rest of the specs seem tame.
I almost ran a v2 though and have ridden in a car that had one and it is a nice cam.
I almost ran a v2 though and have ridden in a car that had one and it is a nice cam.
I'd look at a 223/231 111+3 or 227/235 110+3 or something like that with stock heads or stock ported heads.
Thread Starter
Teching In
Joined: Nov 2011
Posts: 41
Likes: 0
From: charleston sc
I want to run stock gears also....I'm a top end ***** but at the same time I want lots down low
Thread Starter
Teching In
Joined: Nov 2011
Posts: 41
Likes: 0
From: charleston sc
Man if I can go higher I would, but I blew up my bike and my vw from playin with the red line so it makes my butthole pucker just thinking about it