Need ASA dry sump info

Reply Subscribe

Thread Tools

Search this Thread

Mar 4, 2013 | 11:33 PM

CL2000

Thread Starter

Teching In

iTrader: (1)

Joined: Nov 2010

Posts: 43

Likes: 0

From: Martinez,CA

Need ASA dry sump info

I am looking for info on the ASA dry sump system. I have the pan and pump. I am looking for what size crank pulley it needs and the plumbing routing. Any info would be great!
Thanks,
Chad

Mar 6, 2013 | 01:44 PM

garcr4

On The Tree

iTrader: (1)

Joined: Jan 2009

Posts: 164

Likes: 1

From: Deland, Fl

Quote:

Originally Posted by CL2000

I am looking for info on the ASA dry sump system. I have the pan and pump. I am looking for what size crank pulley it needs and the plumbing routing. Any info would be great!
Thanks,
Chad

ATI made the dampers and supplied the pulleys for the ASA system. I would call them. I have a pulley, but want to sell it with the pan and pump. Also Tim Schwanke at Schwanke Racing Engines can help

Hub/pulley part no. might be: ATI 916097

Last edited by garcr4; Mar 6, 2013 at 02:04 PM.

Mar 6, 2013 | 05:12 PM

CL2000

Thread Starter

Teching In

iTrader: (1)

Joined: Nov 2010

Posts: 43

Likes: 0

From: Martinez,CA

Thanks! Do you know anything about the plumbing?

Mar 6, 2013 | 08:23 PM

tsheehan

Teching In

iTrader: (1)

Joined: Jan 2013

Posts: 39

Likes: 0

From: New England

ARE makes a great pan for a single or dual stage scavenge. Razor makes a good scavenge pump and ARE has a mount that will allow you to drive the scavenge You will need an oil tank Basically you feed the factory oil pump from the bottom of your oil tank. You scavenge the oil out of your pan and send it back to the tank. Most ASA ls-1 set ups ran -12 line throughout the system. you will want to vent you valve covers back to a catch can use -10 hose minimum.
The ARE pans allow you to run a remote oil filter you can plumb to a cooler.
Are you building a race car?