senicalj4579

iTrader: (41)

tea stg 2 ls6 243 from last year. Thought I might as well add to everyone elses lol

TURBHOE

iTrader: (4)

how did this turn out? i was looking at this cam for a 408 build.

off topic kinda but would a 408 lower the rpm range of this cam? maybe into the 6400rpm range.

Rise of the Phoenix

iTrader: (27)

Yeah, the bigger cubes would lower the RPM band quite a bit. In my opinion, the SNS Stage 3 is too small for a 408. Talk to Martin and have him hook you up with something custom.

JakeFusion

iTrader: (7)

Your exhaust numbers are better than mine. Did you do the nitrous port?

muttstang

iTrader: (1)

Martin told me they may be coming out with a "Stroker" series of cams so def ask him about those!

97camaro383

iTrader: (31)

I got it running and hopefully I can get it tuned this week!!!

Sales@Tick

iTrader: (3)

IMO the Stage 3 camshaft does not have a late enough intake valve close event to properly allow torque to carry far enough into the RPM band to do a 408 justice in the power department. You'd need something with a later intake valve close event to really let a 408 shine.

senicalj4579

iTrader: (41)

No I didnt. I just asked for stage 2 lol

97camaro383

iTrader: (31)

Recorded video with a BRICK but hopefully I can get some better ones up soon! Car is untuned idling around 1k.

Ronny_02_WS6

iTrader: (6)

Almost the same set up as me, the only difference is that I got 64cc Patriot Heads and the Milder version of the SNS Stage 3. I haven't dynoed it yet but it pulls like crazy, my stock injectors were at 115% and now they're around 85% with the 36 lbs.

TURBHOE

iTrader: (4)

that sounds pretty bad ***. i miss my lopey *** cam.

TURBHOE

iTrader: (4)

i just dont want to shift at 6500rpm or better and i like to keep my low end torque for towing.

whats up with this stroker line of cams? when will they be out?

senicalj4579

iTrader: (41)

Yes! Congrats man. Glad to see you have it together. More vids are always liked

97camaro383

iTrader: (31)

I watched your idle videos 10x before I got my car done lol your car sounds really good!!! I have 36lb injectors and will hopefully tune it this week and see what the injectors are doing. Im excited to see how it runs!

Thanks! The video doesn't do it justice, maybe in the next video Ill get the cutouts open!

Thanks! I got to get some wiring done for the wideband and nitrous but then Ill get it tuned and make some more videos. I need a better phone because it can't capture how good it sounds!

97camaro383

iTrader: (31)

Anybody like open cutouts???

Sales@Tick

iTrader: (3)

They can be ordered whenever as I've already sold several. They just aren't on the website yet.
Sounds awesome Ross!