Pics Of My Advanced Induction Dart/RHS 223cc Heads/Build Thread
#528
Any advice on what to use to help seal the IAT sensor in the air lid? The FTP 98mm lid did not come pre-drilled for the IAT sensor. I do not have the grommet thing from my old SLP lid.
Also, I'm going to try and re-use my 4"x6" silicone tube that I got from intake.hoses.com, but would something like this work better since it's got a 22 degree bend?
Or something like this: This one is 4"x7" and it says it can be used to go from your lid and can be bent slightly for a better fit.
Also, I'm going to try and re-use my 4"x6" silicone tube that I got from intake.hoses.com, but would something like this work better since it's got a 22 degree bend?
Or something like this: This one is 4"x7" and it says it can be used to go from your lid and can be bent slightly for a better fit.
Last edited by Rise of the Phoenix; 02-22-2017 at 08:06 AM.
#530
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,838 Likes
on
1,146 Posts
Any advice on what to use to help seal the IAT sensor in the air lid? The FTP 98mm lid did not come pre-drilled for the IAT sensor. I do not have the grommet thing from my old SLP lid.
Also, I'm going to try and re-use my 4"x6" silicone tube that I got from intake.hoses.com, but would something like this work better since it's got a 22 degree bend?
Also, I'm going to try and re-use my 4"x6" silicone tube that I got from intake.hoses.com, but would something like this work better since it's got a 22 degree bend?
#532
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,838 Likes
on
1,146 Posts
I used a grommet, but IDK which one any more. I also run a volant intake, so the IAT is pre-filter vs the stock style lid, which the IAT will be post-filter.
#533
Tick Performance has it. Guess I'll just order it to be on the safe side.
http://www.tickperformance.com/gm-in...ature-grommet/
http://www.tickperformance.com/gm-in...ature-grommet/
#535
TECH Senior Member
iTrader: (26)
Any advice on what to use to help seal the IAT sensor in the air lid? The FTP 98mm lid did not come pre-drilled for the IAT sensor. I do not have the grommet thing from my old SLP lid.
Also, I'm going to try and re-use my 4"x6" silicone tube that I got from intake.hoses.com, but would something like this work better since it's got a 22 degree bend?
Or something like this: This one is 4"x7" and it says it can be used to go from your lid and can be bent slightly for a better fit.
Also, I'm going to try and re-use my 4"x6" silicone tube that I got from intake.hoses.com, but would something like this work better since it's got a 22 degree bend?
Or something like this: This one is 4"x7" and it says it can be used to go from your lid and can be bent slightly for a better fit.