JakeFusion

iTrader: (7)

It shouldn't be that tight. Mine pops out no problem.

I put in the bottom hole with the NW. If you have too much slack, that's not good. But if it's too tight, you'll need to open up your cruise control module and adjust the cable length from there. Luckily, I didn't have to do it. So I don't know exactly what's involved.

Rise of the Phoenix

iTrader: (27)

Yeah, it definitely doesn't pop in and out. I'll try the bottom one.

Jtm2085

iTrader: (1)

My nick Williams went in easily. The WARR I just installed I had to press the **** out of it to get it in.

Rise of the Phoenix

iTrader: (27)

I got it in. Not fully, but it's flush. It's just going to have to work.

JakeFusion

iTrader: (7)

It's doing it again where the last post isn't showing. The way to solve it is for someone else to post. What the...

Rise of the Phoenix

iTrader: (27)

Is the problem happening to other threads? I assume admins are aware?

JakeFusion

iTrader: (7)

Are you posting through the mobile app? It only seems to happen when someone posts on the mobile app.

blk00ss

iTrader: (66)

Lmao. Admins giving two ***** is funny. All they care about is post approval. Anytime someone's mentions the adds it just gets skipped right over. So I doubt they care about phantom post at all lol

Rise of the Phoenix

iTrader: (27)

Yes, I'm using the mobile app.

blk00ss

iTrader: (66)

........

kinglt-1

iTrader: (26)

Nope...Happens on desktop mode too.

Rise of the Phoenix

iTrader: (27)

Got pretty much everything done now. I still need to run the rubber vent tube coming off the passenger side valve cover to either the rubber coupler that connects the TB to the lid, or run it to the lid itself. If I run it to the rubber coupler, I won't need to replace the rubber vent tube, but if I run it to the lid, I'll need a longer line.

I also have not drilled a hole in the lid for the IAC. I'm honestly thinking about zip tying it to somewhere around the engine bay. Would that work? I would think it would be getting air.

Rise of the Phoenix

iTrader: (27)

Decided to run the vent line and the IAT sensor in the coupler connecting the TB to the Lid. I need to pickup some 11/32 hose because the existing vent hose is not long enough to reach.

Rise of the Phoenix

iTrader: (27)

Car fired right up today. Idled a little rough for about 30 seconds, but after that it did great. Hit the throttle a few times, and all seems good there. No slack at all and throttle response was great.

Jtm2085

iTrader: (1)

Glad to hear you got it all squared away. I know when I was swapping from my 92 to 102 I was ready to burn my car. But after it started and idled great the feeling passed

Rise of the Phoenix

iTrader: (27)

She'll need some fine tuning before getting it back on the dyno, but I was surprised how well it idled. Throttle response feels way better too. Super crisp.

G Atsma

Let's see if this bump will get Rise of the Phoenix's latest post up here.....
Edit- Yep, it worked!

Rise of the Phoenix

iTrader: (27)

Is it that issue when posting from the mobile app that no one wants to fix?

G Atsma

Gotta do it again.....
Edit- and here we are....

G Atsma

Good question...