Any one running a Lunati cam in their LS block? I have an engine builder who uses these cams and is encouraging me to put one in my AE. Tell me the good, bad and ugly of using this cam.

 

depends on the specs

you wont have problems with the lunati cam but usually the top engine builders i know of have their own guy that custom does cams for them

 

the TSP231/237 cam is a lunati grind
and I believe someone said MTI uses lunati grinds for most of their cams

 

I know they are cheap. I ordered mine from SDPC for $350.

 

I agree with onyxxtreme "TSP231/237 cam is a lunati grind" and I am very happy with it
my $0.02, Johnny

 

the old b1/t1 were lunati grinds

 

My C2 MTI is a Lunati

 

I have a lunati 242/242 .595/.595 112LSA, and am very happy with it. Bought it direct from lunati for 365 shipped.

 

i have a lunati 232 237 .566 .566 114 lsa makes lots of low end torque, and it's for sale. pm me if interested, there's only 100 miles on it.

 

I have a Lunati 55006 cam in my 98 Z. It has 224/224 degrees duration @ .050" and .560"/.560" lift @ valve, with 112 LSA. I love it! I has 4 degrees advance ground in. and it works great on the street. I only have like 300 miles on it so far and I am well pleased so far. I paid 350 for it at Summit.

 

I purchased the Lunati 222* 228* direct from Lunati also same $365 shipped.

 

MTI switched to Comp over 2 years ago. My T1 cam was ground by them for MTI.