Mavn

iTrader: (3)

Im ordering parts as we speak! I have longtubes, ORY, 3.73's, 3200 Circle D stall, Trans Go shift kit, SLP Lid, Cut-out. All sitting in my house ready to install. But Want to add a Cam. What would be a good streetable cam with nice tone and power?

Can I get 380-390 ish RWHP cam only and mid 11's with a good tire?

Thanks!

Mavn

dr_whigham

iTrader: (49)

Martin @ Tick Performance

Evil Eric

iTrader: (3)

Look at the Comp 216/220 and its cousins. Plenty of off the shelf grinds that will get you what you want.

mjs1012

iTrader: (36)

228r makes plenty of useable power for the street and is easy to tune for the drive ability you'd want in a dd.

groundZ-28ERO

im running a 230/235 .600/.612 113+4lsa. i have no issue on the street. it all really comes down to the tune.

Loudmouthls2

I have a really big cam in my ls2 and I'm an m6.. And I'm perfectly streetable. I'd go big or go home

garygnu

alot of people are happy with the Texas Speed 228r cam .if you want a little more power the torquer v2 is good .

Mavn

iTrader: (3)

I was thinking the 228r or the v2 after reading and ehat you guys have said What would go better with stock ls6 heads? I can grab some ls6 heads really really cheap.

Thanks!

senicalj4579

iTrader: (41)

Go with a 228 cam. I have one and stage 2 ls6 heads. Drives great on the street.

masterz28

iTrader: (8)

I agree with a cam around 224-232 xer lobe camshaft. It'll work with that tc

Always2Slow

iTrader: (8)

There is no way I would ever use a XER lobe for anything with LSL lobes and LXL lobes out. It's old dated lobes that were copied from SBC to an LS based design for use. If you want something that will actually have a great useable power band on an ls1 do not go any bigger than 230 duration on the intake side. You would be quite surprised how much power a small cam makes like even a 221 lobe when its properly setup with good parts in a well thought out combination.

MikeWS6

Something in the 228-230 range. Do the heads at the sametime. Later you will kick yourself if you dont. Trust me.

99Bluz28

iTrader: (35)

225(.612")/230(.609") 113lsa+4, lsl /lxl lobes, with 1.5* overlap.