Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Tick Performance emission friendly cam

Thread Tools
 
Search this Thread
 
Old 11-13-2013 | 01:10 AM
  #1  
Empatho's Avatar
Thread Starter
TECH Fanatic
15 Year Member
iTrader: (16)
 
Joined: Aug 2006
Posts: 1,078
Likes: 1
From: Internet
Default Tick Performance emission friendly cam

Just looking for some info on this cam. How does the cam perform, what kind of gas millage does it get? I searched but I couldn't really find much. And also, whats the valve train longevity like?

Basically I live in the comi state of California and I want to get a cam that would be good for a daily driver and that would also pass the smog, so no headers. I also like that the sleeper approach, I have been thinking of getting an ls6 cam since it would pass the smog and drive like stock, but I know I could do better. I have an m6 2002 z28, right now my performance mods are port and polished throttle body, lid, ftra, cat back, and under drive pulley. I got some 243 heads that I'm planning to send to ai or west coast racing cylinder heads, and I been debating on what cam to get.

Last edited by Empatho; 11-13-2013 at 07:33 PM.
Old 11-14-2013 | 05:12 AM
  #2  
99Bluz28's Avatar
TECH Senior Member
iTrader: (35)
 
Joined: Nov 2007
Posts: 9,705
Likes: 11
From: C. V., Kalifornia
Default

I believe the lobes they use are CompCam LXL lobes, which will be easier on the valve train(and quieter) that the LSL, XER, and LSK lobes used on many CompCam grinds. Now if you are more worried about valve train life than power then look at CompCam Xreme RPM lobes. Another nice option is the Crane 149561 (216/224 115lsa, lift .551".551"), it has -10* overlap like the Tick cam and, but with better low to midrange power and HP peaking around 300rpm sooner.
Old 11-14-2013 | 08:14 AM
  #3  
BOBS99SS's Avatar
Captain Double Post
iTrader: (2)
 
Joined: Jun 2010
Posts: 1,617
Likes: 2
From: Elyria Ohio
Default

ls6 cam and procharger,also look and see if guys are passing with longtubes, i know ive seen guys swap headers for e test, i would be looking straight at boost, only way your going to get good power and pass emissions, bobs brute speed,d1sc,you can also get a better cam than the ls6 and still pass
Old 11-14-2013 | 03:00 PM
  #4  
Joey@Tick's Avatar
LS1TECH Sponsor

iTrader: (20)
 
Joined: Oct 2007
Posts: 1,751
Likes: 2
From: Mount Airy, NC
Default

I'm sure Martin@Tick will see this thread soon and reply publicly for you, Empatho, but if you'd like an immediate answer, shoot him a PM. I think you'll be impressed with Martin's valvetrain knowledge!
Old 11-14-2013 | 07:44 PM
  #5  
Empatho's Avatar
Thread Starter
TECH Fanatic
15 Year Member
iTrader: (16)
 
Joined: Aug 2006
Posts: 1,078
Likes: 1
From: Internet
Default

Originally Posted by 99Bluz28
I believe the lobes they use are CompCam LXL lobes, which will be easier on the valve train(and quieter) that the LSL, XER, and LSK lobes used on many CompCam grinds. Now if you are more worried about valve train life than power then look at CompCam Xreme RPM lobes. Another nice option is the Crane 149561 (216/224 115lsa, lift .551".551"), it has -10* overlap like the Tick cam and, but with better low to midrange power and HP peaking around 300rpm sooner.
For the valve springs I'm looking for something that would not wear them out to fast, like in under 35k miles. Ill be happy with 35k+ miles out of the valve springs. If the valve springs last over 35k miles with the tick smog cam then I'm good with that.

Originally Posted by BOBS99SS
ls6 cam and procharger,also look and see if guys are passing with longtubes, i know ive seen guys swap headers for e test, i would be looking straight at boost, only way your going to get good power and pass emissions, bobs brute speed,d1sc,you can also get a better cam than the ls6 and still pass
I like the fi power but its way to expensive to do it right, even though I did think of going with the ls6 cam since it works good with boost. I just need enough power to stay on top of the food chain of all the new stock cars, like the 5.0s and camaros.

Originally Posted by Joey@Tick
I'm sure Martin@Tick will see this thread soon and reply publicly for you, Empatho, but if you'd like an immediate answer, shoot him a PM. I think you'll be impressed with Martin's valvetrain knowledge!
Thanks, I hope he steps in here soon
Old 11-14-2013 | 07:52 PM
  #6  
Goosecaddy05's Avatar
TECH Enthusiast
 
Joined: Jul 2012
Posts: 552
Likes: 1
Default

I'm considering doing this cam or something similar in a ls3 427 stroker with prc 247 heads and 11.5 compression. seems like the specs of the cam are extremely similar to the stock ls7 cam.... i'm looking to make right at 500rwhp if possible and i've seen people make that with full bolt on c6 zo6 with stock cam.... my drivetrain loss is more though so might not quite make it.... still looks appetizing though not worrying about emissions and having that sleeper aspect plus in a heavy car like mine tq is more important than hp
Old 11-14-2013 | 07:52 PM
  #7  
bhobbs's Avatar
Staging Lane
 
Joined: Apr 2013
Posts: 74
Likes: 0
From: Chino, Ca
Default

I'm interested in this info as well. I'm planning an Ls1 build and need to pass CA smog.
Old 11-15-2013 | 01:07 AM
  #8  
Empatho's Avatar
Thread Starter
TECH Fanatic
15 Year Member
iTrader: (16)
 
Joined: Aug 2006
Posts: 1,078
Likes: 1
From: Internet
Default

Originally Posted by Goosecaddy05
I'm considering doing this cam or something similar in a ls3 427 stroker with prc 247 heads and 11.5 compression. seems like the specs of the cam are extremely similar to the stock ls7 cam.... i'm looking to make right at 500rwhp if possible and i've seen people make that with full bolt on c6 zo6 with stock cam.... my drivetrain loss is more though so might not quite make it.... still looks appetizing though not worrying about emissions and having that sleeper aspect plus in a heavy car like mine tq is more important than hp
Sounds like a pretty good set up, I would go with a little bigger cam though since you have a 427.
Old 11-15-2013 | 02:49 AM
  #9  
Goosecaddy05's Avatar
TECH Enthusiast
 
Joined: Jul 2012
Posts: 552
Likes: 1
Default

if i want more power i'm going to change compression with a thicker head gasket and get a procharger.... 7 psi should be plenty... car will see road course use so too much power would be counter productive.... i want a smooth power band... the powerband on my curent setup is great, but i'm over the lumpy idle.... when my car was just a bolt on car it would break loose at 3k when i rolled off idle.. now when i do the same thing it doesnt even though i make 60 more tq and 85 more hp...
Old 11-15-2013 | 11:36 AM
  #10  
CaliboyTA's Avatar
TECH Enthusiast
iTrader: (2)
 
Joined: Apr 2003
Posts: 716
Likes: 3
From: CA
Default

to tell u the truth, if u want to go fast, sell ur fbody and get a z06. Smog over here is getting out of hand. My friends STOCK except borla adj exhaust 02 ss went in for a star smog and they were trying to fail him on the visuals because it didn't have the carb# on a factory cats. luckly my friend went to school for smog cert and he knows his stuff and told off the smog tech.
Old 11-15-2013 | 12:30 PM
  #11  
Burken01's Avatar
TECH Addict
15 Year Member
iTrader: (88)
 
Joined: Mar 2005
Posts: 2,923
Likes: 13
From: Anaheim, Ca
Default

Do what we do, pass smog while Its stock. Then add the cam the next day..

Last edited by Burken01; 11-15-2013 at 12:46 PM.
Old 11-15-2013 | 01:17 PM
  #12  
Goosecaddy05's Avatar
TECH Enthusiast
 
Joined: Jul 2012
Posts: 552
Likes: 1
Default

wow that's pretty reduculous... i had no idea cali was so petty about emissions.... i used to live in san fran but i never had to get tested there
Old 11-15-2013 | 01:39 PM
  #13  
Burken01's Avatar
TECH Addict
15 Year Member
iTrader: (88)
 
Joined: Mar 2005
Posts: 2,923
Likes: 13
From: Anaheim, Ca
Default

Originally Posted by Goosecaddy05
wow that's pretty reduculous... i had no idea cali was so petty about emissions.... i used to live in san fran but i never had to get tested there
Yes it's bad, the other day they had a check point with portable rollers to roll vehicles on and they were doing random smog check/inspection!

Stay off the main streets over here in the OC!
Old 11-15-2013 | 02:56 PM
  #14  
mchicia1's Avatar
TECH Resident

iTrader: (5)
 
Joined: Apr 2009
Posts: 888
Likes: 9
Default

**** state
Old 11-15-2013 | 02:59 PM
  #15  
Cajun ELESS-ONE's Avatar
TECH Enthusiast
10 Year Member
 
Joined: Jan 2013
Posts: 675
Likes: 65
From: Thibodaux LA
Default

step one- move to a state that dosent care about emissions.
step two- mod car however you want
Old 11-15-2013 | 03:13 PM
  #16  
Burken01's Avatar
TECH Addict
15 Year Member
iTrader: (88)
 
Joined: Mar 2005
Posts: 2,923
Likes: 13
From: Anaheim, Ca
Default

Yup, California's big business is "smog" check points, big time "DUI checkpoints", no calling/texting "hands free" while driving, I guess it's going to start Including eating in the car as well.
Old 11-15-2013 | 03:25 PM
  #17  
chevybayboy's Avatar
TECH Fanatic
iTrader: (6)
 
Joined: Jul 2012
Posts: 1,293
Likes: 10
Default

Originally Posted by Burken01
Yup, California's big business is "smog" check points, big time "DUI checkpoints", no calling/texting "hands free" while driving, I guess it's going to start Including eating in the car as well.
Yup I heard it start in 2014 I left 3 months ago when the added 7 new gun laws love Cali but not there laws
Old 11-15-2013 | 03:27 PM
  #18  
JakeFusion's Avatar
Super Hulk Smash
iTrader: (7)
 
Joined: Aug 2004
Posts: 11,255
Likes: 142
From: Pace, FL
Default

Can you just register an old beat up Civic as your car and pass smog all day then drive your "off-road" vehicle on the street? Do they allow you to tag a car that is not smog legal?
Old 11-15-2013 | 03:33 PM
  #19  
bhobbs's Avatar
Staging Lane
 
Joined: Apr 2013
Posts: 74
Likes: 0
From: Chino, Ca
Default

As far as I know, you have to smog a car every two years to get your tags.
Old 11-15-2013 | 03:36 PM
  #20  
Burken01's Avatar
TECH Addict
15 Year Member
iTrader: (88)
 
Joined: Mar 2005
Posts: 2,923
Likes: 13
From: Anaheim, Ca
Default

Every car driven has to pass smog except old smog exempt cars.

You can register a car NON OP but if you get caught driving it they will ticket you or impound it.


Quick Reply: Tick Performance emission friendly cam



All times are GMT -5. The time now is 01:16 AM.