upgrade all at once?
#21
Staging Lane
Thread Starter
Join Date: Jun 2012
Location: Fayetteville NC
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yep.. but heres my setup ls6 motor, lid, ported maf & tb long tube headers ory borla exhaust all free mods built 4l60e, lca, panhard...about to do the racetronix fuel pump with hotwire because the needle is reading e then when I cut off it moves to 1/4 so if I go in might as well upgrade!
#22
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
If you are looking to get all of that from comp we can sure set you up as it seems you are trying to source them all from one company. As far as pushrods go, it is ALWAYS best to measure. As it happens, COMP has a pushrod checker that works really easy and will get you the measurement you need. It is pn 7701-1. For the LS7 apps it would be 7702-1 as they are longer than the other tool will measure. We can get all of that sent direct to you from comp new.
Please let us know!
Please let us know!