Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Is my valve-train tearring up?

Thread Tools
 
Search this Thread
 
Old Apr 10, 2014 | 07:45 AM
  #1  
rajbcpa's Avatar
Thread Starter
Teching In
 
Joined: Feb 2014
Posts: 20
Likes: 0
From: knoxville TN
Default Is my valve-train tearring up?

This is a picture of the metal I pulled off the magnetic crankcase drain plug...
Attached Thumbnails Is my valve-train tearring up?-camaro3-004.jpg  

Last edited by rajbcpa; Apr 10, 2014 at 08:30 AM.
Reply
Old Apr 10, 2014 | 07:49 AM
  #2  
Darkman's Avatar
TECH Addict
iTrader: (2)
 
Joined: Apr 2009
Posts: 2,167
Likes: 6
From: Spring, Texas
Default

Some of it looks like pieces of valvetrain.
Reply
Old Apr 10, 2014 | 07:51 AM
  #3  
rajbcpa's Avatar
Thread Starter
Teching In
 
Joined: Feb 2014
Posts: 20
Likes: 0
From: knoxville TN
Default

The engine was extensively modified +10 years ago.... ...these bits in the oil pan look like a valve-keeper and perhaps the metal piece of a valve stem seal....

mods include shaved ls6 heads, terra yellow roller rockers, double springs, hot cam, longer push-rods, double roller chain, high volume oil pump, etc....
Reply
Old Apr 10, 2014 | 08:20 AM
  #4  
Darkman's Avatar
TECH Addict
iTrader: (2)
 
Joined: Apr 2009
Posts: 2,167
Likes: 6
From: Spring, Texas
Default

Originally Posted by rajbcpa
...these bits in the oil pan look like a valve-keeper and perhaps the metal piece of a valve stem seal....
Did these come out in an oil change, or do have the engine apart? If the pieces came out with an oil change, I would be pulling the valve covers.
Reply
Old Apr 10, 2014 | 08:33 AM
  #5  
rajbcpa's Avatar
Thread Starter
Teching In
 
Joined: Feb 2014
Posts: 20
Likes: 0
From: knoxville TN
Default

....bits were recovered from the magnetic oil pan plug... engine runs without issue currently...
Reply
Old Apr 10, 2014 | 08:41 AM
  #6  
TurboBuick6's Avatar
TECH Enthusiast
15 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Oct 2010
Posts: 708
Likes: 125
Default

Hard to tell the exact dimensions of the parts, but looks to be either the tip of a valve spring or if there are the hat seals, you have one tearing apart.
Reply
Old Apr 13, 2014 | 06:46 PM
  #7  
rajbcpa's Avatar
Thread Starter
Teching In
 
Joined: Feb 2014
Posts: 20
Likes: 0
From: knoxville TN
Default

...so I tore the driver side valve cover off..... no damage there.... terra yellows and valve stem keepers are all OK....no metal in the DS head....
Reply
Old Apr 25, 2014 | 07:36 AM
  #8  
robertbartsch1's Avatar
Registered User
 
Joined: Apr 2014
Posts: 8
Likes: 0
Default valve covers off - no damage

this is a pic of the valve covers off..... I pulled one of the Terra-Yellow rocker arms off - no damage.

Should I just keep tearing it down?

....Not sure if I should take the heads off, if nothing is found up top????
Attached Thumbnails Is my valve-train tearring up?-camaro-001.jpg  
Reply
LS1 Tech Stories

The Best V8 Stories One Small Block at Time

story-0

Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

 Pouria Savadkouei
story-1

Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

 Verdad Gallardo
story-2

7 Most Reliable High-Performance Engines GM Has Ever Built

 Verdad Gallardo
story-3

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

 Verdad Gallardo
story-4

6 Common C5 Corvette Failures and What's Involved In Repairing Them

 Pouria Savadkouei
story-5

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

 Verdad Gallardo
story-6

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

 Pouria Savadkouei
story-7

Top 10 Most Powerful Chevy Trucks Ever Made!

 
story-8

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

 Verdad Gallardo
story-9

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

 Verdad Gallardo
Old Apr 25, 2014 | 09:15 AM
  #9  
Darkman's Avatar
TECH Addict
iTrader: (2)
 
Joined: Apr 2009
Posts: 2,167
Likes: 6
From: Spring, Texas
Default

Originally Posted by robertbartsch1
this is a pic of the valve covers off..... I pulled one of the Terra-Yellow rocker arms off - no damage.

Should I just keep tearing it down?

....Not sure if I should take the heads off, if nothing is found up top????
If it were mine, I would to see the top of each valve to make sure everything is in place, so I would take off all the rocker arms.
Reply
Old Apr 25, 2014 | 12:35 PM
  #10  
CBM Motorsports's Avatar
FormerVendor
iTrader: (2)
 
Joined: Dec 2013
Posts: 549
Likes: 3
From: Rancho Cucamonga, CA
Default

That almost looks lifter related to me. I have seen the top sides of the lifter break off before. It also looks like the chunks came from something round. They look too big to be off the valves or keepers. If your rockers look fine, I would start looking a bit below them.
Reply




All times are GMT -5. The time now is 06:36 PM.

story-0
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

Slideshow: We take a close look at the ONE and Artidiag 800BT2 diagnostic tools from Topdon and the reasons to buy one over the other.

By Pouria Savadkouei | 2026-05-28 11:05:11


VIEW MORE
story-1
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

Slideshow: The controversial Ferrari F6 swaps its original flat-12 for a Corvette Z06-derived LT4 V8 and sends power to four rear wheels through a custom-built drivetrain.

By Verdad Gallardo | 2026-05-26 18:23:54


VIEW MORE
story-2
7 Most Reliable High-Performance Engines GM Has Ever Built

Slideshow:These GM engines didn't just make huge power, they survived abuse, boost, track days, and six-digit mileage with a reputation for refusing to quit.

By Verdad Gallardo | 2026-05-21 16:45:27


VIEW MORE
story-3
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Slideshow: This heavily modified 1971 Camaro mixes classic muscle car styling with a fifth-generation Camaro interior and modern LS3 power.

By Verdad Gallardo | 2026-05-12 18:06:42


VIEW MORE
story-4
6 Common C5 Corvette Failures and What's Involved In Repairing Them

Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.

By Pouria Savadkouei | 2026-05-07 18:44:57


VIEW MORE
story-5
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.

By Verdad Gallardo | 2026-04-21 13:57:02


VIEW MORE
story-6
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...

By Pouria Savadkouei | 2026-04-16 10:05:15


VIEW MORE
story-7
Top 10 Most Powerful Chevy Trucks Ever Made!

Slideshow: Top ten most powerful Chevy trucks ever made

By | 2026-03-25 09:22:26


VIEW MORE
story-8
Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Slideshow: Hennessey has turned the Silverado ZR2 into a 700-hp off-road monster with supercharged V8 power and a limited production run.

By Verdad Gallardo | 2026-03-24 18:57:52


VIEW MORE
story-9
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.

By Verdad Gallardo | 2026-03-23 18:53:41


VIEW MORE