Trick flow 215 59cc cam HELP!
Trick flow 215 59cc cam HELP! Hey guys I bought a set of tfs 215's with harland sharpe rr's they buy I bought them off of said they had never been milled and were 64cc I planned on milling to 61cc and running a vrx5 cam I dropped my heads off at hutter racing for ccing and milling I just got a call saying the heads are already 59cc so obviously I can't run the vrx5 I will not fly cut so that's not an option what cams are out there that will clear? Thanks guys
I ran a F14 232/234 .647/.612 on a 114 lsa with some 59cc LS6 heads with the stock graphite gaskets. The TF's will have more room than my stock casting. A starting point for you....
I think I heard the 215's have the same valve drop at 64cc as the 241's at 66cc not sure about the 243 ls6 heads though how did you like the f14 and by chance do you know what your ptv clearances were? The f14 looks nice I'm now looking at fti streetsweeper ht, vrx4,torquer v2 just looking for proven cams that will clear here guys although I will be measuring I'd rather not have to reorder a cam
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
You'll probably have to flycut. Those heads would clear at 61cc and stock gaskets, but it's tight. 59cc takes another .012" of clearance away...
Btw, flycutting isn't that bad.
Btw, flycutting isn't that bad.
TECH Enthusiast
Joined: Dec 2012
Posts: 563
Likes: 3
From: Wilson n.c.
I think I heard the 215's have the same valve drop at 64cc as the 241's at 66cc not sure about the 243 ls6 heads though how did you like the f14 and by chance do you know what your ptv clearances were? The f14 looks nice I'm now looking at fti streetsweeper ht, vrx4,torquer v2 just looking for proven cams that will clear here guys although I will be measuring I'd rather not have to reorder a cam
AFR 205's at 59cc (15* valve angle, as opposed to the TFS 13.5*) GM MLS gaskets and an FTI 229/236 .631.631 cam and no fly cutting for me.
But measure. Be sure. Don't risk your valve guides and valves...
But measure. Be sure. Don't risk your valve guides and valves...