Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Eps 222/226 ?

Thread Tools
 
Search this Thread
 
Old Dec 15, 2014 | 04:51 PM
  #1  
Chris25's Avatar
Thread Starter
TECH Resident
iTrader: (1)
 
Joined: Sep 2013
Posts: 774
Likes: 114
From: Clearwater, FL
Default Eps 222/226 ?

So I am getting ready to do a cam install in January getting everything together and just wanted to see what the average gains are with the EPS 222/226 113 LSA cam w/tune (Hoping to get low 12s high 11s). I have gone through all the threads and done the research just want to see what everyones expierience with this cam has been. Throwing in an LS2 chain, Melling pump, Pushrods, and BTR springs with a powerbond 25% UDP with it.
Reply
Old Dec 15, 2014 | 05:33 PM
  #2  
sbf's Avatar
sbf
TECH Enthusiast
10 Year Member
Liked
 
Joined: Dec 2012
Posts: 563
Likes: 3
From: Wilson n.c.
Default

Txcamss ran low 11 with that cam with a bolt on ls6 crate engine and circle d stall.and I've seen plenty of 400whp with 241 heads.txcamss made 430whp with the ls6 motor his cam was on 115 lsa
Reply
Old Dec 15, 2014 | 05:39 PM
  #3  
Chris25's Avatar
Thread Starter
TECH Resident
iTrader: (1)
 
Joined: Sep 2013
Posts: 774
Likes: 114
From: Clearwater, FL
Default

Originally Posted by sbf
Txcamss ran low 11 with that cam with a bolt on ls6 crate engine and circle d stall.and I've seen plenty of 400whp with 241 heads.txcamss made 430whp with the ls6 motor his cam was on 115 lsa
Ya I seen that build and have really been thinking about doing the 115 LSA, sounds really smooth at idle.
Reply
Old Dec 15, 2014 | 05:54 PM
  #4  
kinglt-1's Avatar
TECH Senior Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (26)
 
Joined: Jul 2005
Posts: 5,892
Likes: 253
From: Ft. Wayne, IN
Default

you would be surprised how well a small cam will run with a good set of heads, ported fast, and a free flowing exhaust. Tony Mamo made 475whp years ago with a 224/228 cam. I think his car went 11.4 @ 124 M6 C5 H/C/I.
Reply
Old Dec 15, 2014 | 06:46 PM
  #5  
Pharcyde50's Avatar
11 Second Club
iTrader: (11)
 
Joined: Aug 2005
Posts: 574
Likes: 0
From: St. Petersburg, FL
Default

Can't go wrong with EPS! Should be an awesome sleeper.
Reply
Old Dec 16, 2014 | 02:03 AM
  #6  
yonerhottlt1's Avatar
TECH Enthusiast
iTrader: (21)
 
Joined: Mar 2009
Posts: 619
Likes: 0
From: Sacramento Ca
Default

There's a guy around here making 432/425 to the wheels with this cam on a 114LSA in an LS6. Runs low 11's in the 120's through a 6 speed in an LT F body.
Reply
Old Dec 16, 2014 | 07:16 AM
  #7  
Chris25's Avatar
Thread Starter
TECH Resident
iTrader: (1)
 
Joined: Sep 2013
Posts: 774
Likes: 114
From: Clearwater, FL
Default

Originally Posted by yonerhottlt1
There's a guy around here making 432/425 to the wheels with this cam on a 114LSA in an LS6. Runs low 11's in the 120's through a 6 speed in an LT F body.
I will be happy to crack 11s. Seems like EPS cams make great power, now I just need to save up and ditch my Ls6 intake for a FAST 92.
Reply
Old Dec 16, 2014 | 07:17 AM
  #8  
Chris25's Avatar
Thread Starter
TECH Resident
iTrader: (1)
 
Joined: Sep 2013
Posts: 774
Likes: 114
From: Clearwater, FL
Default

Originally Posted by Pharcyde50
Can't go wrong with EPS! Should be an awesome sleeper.
Cant argue with the power you made Scott.
Reply
Old Dec 16, 2014 | 08:04 AM
  #9  
samuel6731's Avatar
Teching In
 
Joined: Jan 2012
Posts: 27
Likes: 0
From: NewRoads Louisiana
Default

EPS is local to me, that said alot of guys are running Geoff's cams

Everyone that i know of was beyond satisfied with the results, including me.
For a "smaller" cam they are damn impressive.
I run his 224/230 in a 5.3.

I cant tell you how that particular cam will respond in your particular setup but im sure it will be all you are expecting if not more.
Reply
Old Dec 16, 2014 | 06:00 PM
  #10  
GA95DCMSS's Avatar
TECH Enthusiast
iTrader: (13)
 
Joined: Sep 2007
Posts: 666
Likes: 0
From: SC
Default

Should have no problem with it. I ran low 12s in a 4000lb car with that cam
Reply
Old Dec 16, 2014 | 08:32 PM
  #11  
Chris25's Avatar
Thread Starter
TECH Resident
iTrader: (1)
 
Joined: Sep 2013
Posts: 774
Likes: 114
From: Clearwater, FL
Default

Originally Posted by GA95DCMSS
Should have no problem with it. I ran low 12s in a 4000lb car with that cam
What supporting mods?
Reply
Old Dec 16, 2014 | 08:58 PM
  #12  
GA95DCMSS's Avatar
TECH Enthusiast
iTrader: (13)
 
Joined: Sep 2007
Posts: 666
Likes: 0
From: SC
Default

Originally Posted by Chris25
What supporting mods?
LQ4, Longtube headers (1 3/4"), L92 heads, BTR springs, 3600 converter, 3.73 gears.
Reply
Old Dec 17, 2014 | 08:28 AM
  #13  
Chris25's Avatar
Thread Starter
TECH Resident
iTrader: (1)
 
Joined: Sep 2013
Posts: 774
Likes: 114
From: Clearwater, FL
Default

Thats about what I will have. How was the cam as far as tunning?
Reply
Old Dec 17, 2014 | 04:38 PM
  #14  
BODUKE's Avatar
11 Second Club
10 Year Member
 
Joined: Jul 2010
Posts: 545
Likes: 2
Default

I have a EPS small cam in my car it is helluva.
Reply
Old May 26, 2015 | 12:33 PM
  #15  
BlackNiteWS6's Avatar
10 Second Club
iTrader: (2)
 
Joined: Dec 2003
Posts: 987
Likes: 1
From: s. jersey
Default

Originally Posted by Chris25
I will be happy to crack 11s. Seems like EPS cams make great power, now I just need to save up and ditch my Ls6 intake for a FAST 92.
You will get a ton of people telling you that they gained a million HP with the FAST.
Ask one of them how much better at the track did they do after installing the FAST. I bet you'll get no straight forward replies. You'll hear that they haven't got back to the track after they installed the FAST. But try it, you never know.
Reply




All times are GMT -5. The time now is 09:14 AM.