383 build!
Thread Starter
Staging Lane
Joined: Sep 2013
Posts: 93
Likes: 1
From: Arkansas
When I ordered mine it took about 3 weeks due to them being out of castings at the time.... Everything looks extremely nice in the heads... I ordered mine through Hawkins third gen they were cheaper actually through them than directly though Texas speed and performance. I'll be picking the short block up tomorrow from the machine shop and should have it running by the weekend will keep you posted...
When I ordered mine it took about 3 weeks due to them being out of castings at the time.... Everything looks extremely nice in the heads... I ordered mine through Hawkins third gen they were cheaper actually through them than directly though Texas speed and performance. I'll be picking the short block up tomorrow from the machine shop and should have it running by the weekend will keep you posted...
Awesome. And please do. Most people I have found with them never post back with results or anything
When I ordered mine it took about 3 weeks due to them being out of castings at the time.... Everything looks extremely nice in the heads... I ordered mine through Hawkins third gen they were cheaper actually through them than directly though Texas speed and performance. I'll be picking the short block up tomorrow from the machine shop and should have it running by the weekend will keep you posted...
No doubt! Almost wish I went this route, cheaper & easier than a 416
Thread Starter
Staging Lane
Joined: Sep 2013
Posts: 93
Likes: 1
From: Arkansas
http://www.hawksthirdgenparts.com/heads-prc-as-cast-225cc-ls1-ls2-cathedral-heads/
Thanks guys I'm really excited to get it back running... But here is the link for the heads... And here tsp link they both are priced with out shipping but either way I saved over 100 going through Hawkins
http://www.texas-speed.com/p-3515-prc-as-cast-225cc-ls1ls2-cathedral-heads.aspx
Thanks guys I'm really excited to get it back running... But here is the link for the heads... And here tsp link they both are priced with out shipping but either way I saved over 100 going through Hawkins
http://www.texas-speed.com/p-3515-prc-as-cast-225cc-ls1ls2-cathedral-heads.aspx
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Mine is a wiseco -3cc piston with our PRC 227cc heads and a 244/248 cam on a 112LSA. It made 500RWHP and 475FTLB on our dyno with 1 3/4 headers as i have not changed them to out 1 7/8 yet. Its at 11.5:1 and has a 102/102 set up on it. Going through a 6 speed and a 9" with 3.70 gears.
Thanks
Derek
Thanks
Derek
