Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Estimate power

Thread Tools
 
Search this Thread
 
Old 05-17-2015 | 07:36 PM
  #1  
JTtransAM's Avatar
Thread Starter
On The Tree

 
Joined: Jul 2011
Posts: 178
Likes: 0
From: San Diego,CA
Default Estimate power

What power will i make with this combo? Feel free to critique and give advice where needed.

Tsp 1-7/8 headers with catted y
magnaflow catback
FAST 92 intake/ NW 92 TB
PCR 2.5 5.3 heads with PRC duals .650 (lift)
Cam Motion Titan IV cam I(XA227/232-13+4 .612/.595)
TSP ported oil pump
25% underdrive pulley
Racetronix fuel system
36lb Fast fuel injectors
Old 05-17-2015 | 07:38 PM
  #2  
HCI2000SS's Avatar
TECH Senior Member
iTrader: (2)
 
Joined: Aug 2012
Posts: 11,139
Likes: 16
From: Howell & Fenton MI
Default

Auto or manual?
Old 05-17-2015 | 07:51 PM
  #3  
JTtransAM's Avatar
Thread Starter
On The Tree

 
Joined: Jul 2011
Posts: 178
Likes: 0
From: San Diego,CA
Default

Auto. Yank SS3600 will be going in too.
Old 05-17-2015 | 07:52 PM
  #4  
HCI2000SS's Avatar
TECH Senior Member
iTrader: (2)
 
Joined: Aug 2012
Posts: 11,139
Likes: 16
From: Howell & Fenton MI
Default

Depends on the dyno of course but I'd say maybe 415 or so on the average dyno jet dyno
Old 05-17-2015 | 08:17 PM
  #5  
JTtransAM's Avatar
Thread Starter
On The Tree

 
Joined: Jul 2011
Posts: 178
Likes: 0
From: San Diego,CA
Default

How much of an increase would I see if I went with some ported 243/799s?
Old 05-17-2015 | 08:21 PM
  #6  
HCI2000SS's Avatar
TECH Senior Member
iTrader: (2)
 
Joined: Aug 2012
Posts: 11,139
Likes: 16
From: Howell & Fenton MI
Default

If they were done by the same company or person maybe 10 to 15 hp
Old 05-17-2015 | 08:31 PM
  #7  
JTtransAM's Avatar
Thread Starter
On The Tree

 
Joined: Jul 2011
Posts: 178
Likes: 0
From: San Diego,CA
Default

Well my goal is 425+ rwhp so it looks like this will work for me.
Old 05-17-2015 | 08:39 PM
  #8  
HCI2000SS's Avatar
TECH Senior Member
iTrader: (2)
 
Joined: Aug 2012
Posts: 11,139
Likes: 16
From: Howell & Fenton MI
Default

Just a piece of advice....don't get hung up on a certain dyno number. What the car traps at the track is the true tale of the power it's making
Old 05-17-2015 | 11:12 PM
  #9  
JTtransAM's Avatar
Thread Starter
On The Tree

 
Joined: Jul 2011
Posts: 178
Likes: 0
From: San Diego,CA
Default

Originally Posted by HCI2000SS
Just a piece of advice....don't get hung up on a certain dyno number. What the car traps at the track is the true tale of the power it's making
Thank you for the advice and believe me I know. I'm much more concerned about how the car will drive and perform than the hp it has. I was just curious to see what ppl would estimate the power at. It's my dd and won't see the track but once a year.



Quick Reply: Estimate power



All times are GMT -5. The time now is 05:13 PM.